Red Hat DIRECTORY SERVER 8.1 Command Reference Manual page 210

Chapter 3. Plug-in Implemented Server Functionality Reference
3.5.2.3. nsBindRetryLimit
Contrary to what the name suggests, this attribute does not specify the number of times a database
link retries to bind with the remote server but the number of times it tries to bind with the remote
server. A value of 1 here indicates that the database link only attempts to bind once.
NOTE
Retries only occur for connection failures and not for other types of errors, such as invalid
bind DNs or bad passwords.
Parameter
Entry DN
Valid Range
Default Value
Syntax
Example
3.5.2.4. nsBindTimeout
This attribute shows the amount of time before the bind attempt times out. There is no real valid range
for this attribute, except reasonable patience limits.
Parameter
Entry DN
Valid Range
Default Value
Syntax
Example
3.5.2.5. nsCheckLocalACI
Reserved for advanced use only. This attribute controls whether ACIs are evaluated on the database
link as well as the remote data server. Changes to this attribute only take effect once the server has
been restarted.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
196
Description
cn=default instance config, cn=chaining
database, cn=plugins, cn=config
0 to 5
3
Integer
nsBindRetryLimit: 3
Description
cn=default instance config, cn=chaining
database, cn=plugins, cn=config
0 to 60 seconds
15
Integer
nsBindTimeout: 15
Description
cn=default instance config, cn=chaining
database, cn=plugins, cn=config
on | off
off
DirectoryString
nsCheckLocalACI: on