Red Hat DIRECTORY SERVER 8.1 Command Reference Manual page 120

Chapter 2. Core Server Configuration Reference
nsTaskTotalItems
This attributes shows the total number of subtasks that must be completed for the task operation.
When the nsTaskCurrentItem attribute has the same value as nsTaskTotalItems, then the task
is completed.
This attribute value is set by the server and should not be edited.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
nsTaskCancel
This attribute allows a task to be aborted while in progress. This attribute can be modified by users.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
ttl
This attribute sets the amount of time (in seconds) the task entry will remain in the DSE after the
task has finished or aborted. Setting a ttl attribute allows the task entry to be polled for new status
information without missing the exit code. Setting the ttl attribute to 0 means that the entry is not
cached.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
106
Description
cn=task_name, cn=task_type, cn=tasks,
cn=config
0 to the maximum 32 bit integer value
(2147483647)
Integer
nsTaskTotalItems: 152
Description
cn=task_name, cn=task_type, cn=tasks,
cn=config
true | false
Case-insensitive string
nsTaskCancel: true
Description
cn=task_name, cn=task_type, cn=tasks,
cn=config
0 (cannot be cached) to the maximum 32 bit
integer value (2147483647)
DirectoryString
ttl: 120