Red Hat DIRECTORY SERVER 8.1 Command Reference Manual page 37

Parameter
Valid Values
Default Value
Syntax
Example
2.3.1.28. nsslapd-auditlog-logrotationsynchour (Audit Log Rotation Sync
Hour)
This attribute sets the hour of the day for rotating audit logs. This attribute must be used in
conjunction with nsslapd-auditlog-logrotationsync-enabled and nsslapd-auditlog-
logrotationsyncmin attributes.
Parameter
Entry DN
Valid Range
Default Value
Syntax
Example
2.3.1.29. nsslapd-auditlog-logrotationsyncmin (Audit Log Rotation Sync
Minute)
This attribute sets the minute of the day for rotating audit logs. This attribute must be used in
conjunction with nsslapd-auditlog-logrotationsync-enabled and nsslapd-auditlog-
logrotationsynchour attributes.
Parameter
Entry DN
Valid Range
Default Value
Syntax
Example
2.3.1.30. nsslapd-auditlog-logrotationtime (Audit Log Rotation Time)
This attribute sets the time between audit log file rotations. The audit log is rotated when this
time interval is up, regardless of the current size of the audit log. This attribute supplies only the
number of units. The units (day, week, month, and so forth) are given by the nsslapd-auditlog-
logrotationtimeunit attribute. If the nsslapd-auditlog-maxlogsperdir attribute is set to 1,
the server ignores this attribute.
Although it is not recommended for performance reasons to specify no log rotation, as the log
grows indefinitely, there are two ways of specifying this. Either set the nsslapd-auditlog-
Description
on | off
off
DirectoryString
nsslapd-auditlog-logrotationsync-enabled: on
Description
cn=config
0 through 23
None (because nsslapd-auditlog-
logrotationsync-enabled is off)
Integer
nsslapd-auditlog-logrotationsynchour: 23
Description
cn=config
0 through 59
None (because nsslapd-auditlog-
logrotationsync-enabled is off)
Integer
nsslapd-auditlog-logrotationsyncmin: 30
cn=config
23