Red Hat DIRECTORY SERVER 8.1 Command Reference Manual page 101

Replication Attributes under cn=ReplicationAgreementName, cn=replica, cn="suffixName", cn=mapping tree, cn=config
2.3.8.9. nsDS5ReplicaLastInitEnd
This optional, read-only attribute states when the initialization of the consumer replica ended.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
2.3.8.10. nsDS5ReplicaLastInitStart
This optional, read-only attribute states when the initialization of the consumer replica started.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
2.3.8.11. nsDS5ReplicaLastInitStatus
This optional, read-only attribute provides status for the initialization of the consumer. There is typically
a numeric code followed by a short string explaining the status. Zero (0) means success.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Description
cn=ReplicationAgreementName, cn=replica,
cn=suffixDN, cn=mapping tree, cn=config
YYYYMMDDhhmmssZ is the date/time in
Generalized Time form at which the connection
was opened. This value gives the time in relation
to Greenwich Mean Time. The hours are set with
a 24-hour clock. The Z at the end indicates that
the time is relative to Greenwich Mean Time.
GeneralizedTime
nsDS5ReplicaLastInitEnd: 20090504121603Z
Description
cn=ReplicationAgreementName, cn=replica,
cn=suffixDN, cn=mapping tree, cn=config
YYYYMMDDhhmmssZ is the date/time in
Generalized Time form at which the connection
was opened. This value gives the time in relation
to Greenwich Mean Time. The hours are set with
a 24-hour clock. The Z at the end indicates that
the time is relative to Greenwich Mean Time.
GeneralizedTime
nsDS5ReplicaLastInitStart: 20090503030405
Description
cn=ReplicationAgreementName, cn=replica,
cn=suffixDN, cn=mapping tree, cn=config
0 (Consumer Initialization Succeeded), followed
by any other status message.
String
87