Red Hat DIRECTORY SERVER 8.1 Command Reference Manual page 208

Chapter 3. Plug-in Implemented Server Functionality Reference
Parameter
Example
3.5.1.2. nsMaxResponseDelay
This error detection, performance-related attribute specifies the maximum amount of time it can take
a remote server to respond to an LDAP operation request made by a database link before an error
is suspected. Once this delay period has been met, the database link tests the connection with the
remote server.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
3.5.1.3. nsMaxTestResponseDelay
This error detection, performance-related attribute specifies the duration of the test issued by the
database link to check whether the remote server is responding. If a response from the remote server
is not returned before this period has passed, the database link assumes the remote server is down,
and the connection is not used for subsequent operations.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
3.5.1.4. nsTransmittedControls
This attribute, which can be both a global (and thus dynamic) configuration or an instance (that is,
cn=database link instance, cn=chaining database, cn=plugins, cn=config) configuration
attribute, allows the controls the database link forwards to be altered. The following controls are
forwarded by default by the database link:
• Managed DSA (OID: 2.16.840.1.113730.3.4.2)
• Virtual list view (VLV) (OID: 2.16.840.1.113730.3.4.9)
• Server side sorting (OID: 1.2.840.113556.1.4.473)
194
Description
nsActiveChainingComponents: cn=uid
uniqueness, cn=plugins, cn=config
Description
cn=config, cn=chaining database, cn=plugins,
cn=config
Any valid delay period in seconds
60 seconds
Integer
nsMaxResponseDelay: 60
Description
cn=config, cn=chaining database, cn=plugins,
cn=config
Any valid delay period in seconds
15 seconds
Integer
nsMaxTestResponseDelay: 15