Cn=Monitor - Red Hat DIRECTORY SERVER 8.1 Command Reference Manual

2.3.9.5. nsds7WindowsDomain
This attribute sets the name of the Windows domain to which the Windows sync peer belongs.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
2.3.9.6. nsds7WindowsReplicaSubtree
The suffix or DN of the Windows subtree that is being synchronized.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
2.3.9.7. winSyncInterval
This attribute sets how frequently, in seconds, the Directory Server polls the Windows sync peer to
look for changes in the Active Directory entries. If this entry is not set, the Directory Server checks the
Windows server every five (5) minutes, meaning the default value is 300 (300 seconds).
This value can be set lower to write Active Directory changes over to the Directory Server faster or
raised if the directory searches are taking too long.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example

2.3.10. cn=monitor

Information used to monitor the server is stored under cn=monitor. This entry and its children are
read-only; clients cannot directly modify them. The server updates this information automatically. This
Description
cn=syncAgreementName, cn=replica,
cn=suffixDN, cn=mapping tree, cn=config
Any valid domain name
DirectoryString
nsDS7WindowsDomain: DOMAINWORLD
Description
cn=syncAgreementName, cn=replica,
cn=suffixDN, cn=mapping tree, cn=config
Any valid suffix or subsuffix
DirectoryString
nsDS7WindowsReplicaSubtree: cn=Users,
dc=domain, dc=com
Description
cn=syncAgreementName, cn=replica,
cn=suffixDN, cn=mapping tree, cn=config
1 to the maximum 32-bit integer value
(2147483647)
300
Integer
winSyncInterval: 600
cn=monitor
95