Cleaning The Touch Overlay - AMX VIEWPOINT WIRELESS TOUCH PANELS (G3 FIRMWARE) Instruction Manual

Wireless touch panels (extended range) (firmware version g3)
Table of Contents

Advertisement

Product Information
Power
jack
Programming
Stereo plug male
ViewPoint
programming
FIG. 2 ViewPoint connectors

Cleaning the Touch Overlay

You should clean the touch screen overlay after each day's use. Always use clean cotton cloths, and
a spray bottle of cleaning solution consisting of 50% isopropyl alcohol and 50% water.
It is recommended that you do not attempt to replace the internal Lithium battery.
This battery has a lifespan of up to 5 years.
If there is a problem with this piece, please contact your AMX sales representative to
make arrangements to ship your panel back to the factory for battery replacement.
4
jack
DB-9 connector
to PC
Cable FG10-817 to cable FG10-727
cable
ViewPoint Wireless Touch Panels

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VIEWPOINT WIRELESS TOUCH PANELS (G3 FIRMWARE) and is the answer not in the manual?

This manual is also suitable for:

Viewpoint wireless seriesViewpoint netwave series

Table of Contents