AMX VIEWPOINT WIRELESS TOUCH PANELS (G3 FIRMWARE) Instruction Manual page 24

Programming
System Send_Commands (Cont.)
PAGE
Flips to a page
with a specified
page name.
PKEYP
Displays aster-
isks (*) for keypad
entries.
PPOF
Closes a specific
popup page.
PPON
Opens a specific
popup page.
QBEEP
Stops all beeps.
RESET
Clears panel sta-
tus (same as
power up).
SETUP
Goes to the Setup
page.
20
Syntax:
"'PAGE-<page name>'"
Variable:
page name = 1 - 50 ASCII characters
Example:
SEND_COMMAND TP,"'PAGE-MAIN PAGE'"
Flips the touch panel to the page named MAIN PAGE.
Syntax:
"'PKEYP-<number string>'"
Variable:
number string = 0 - 9999
Example:
SEND_COMMAND TP,"'PKEYP-1988'"
Displays the touch panel keypad with **** instead of 1988.
Syntax:
"'PPOF-<page name>'"
Variable:
page name = 1 - 50 ASCII characters
Example:
SEND_COMMAND TP,"'PPOF-Popup Page 1'"
Closes Popup Page 1.
Syntax:
"'PPON-<page name>'"
Variable:
page name = 1 - 50 ASCII characters
Example:
SEND_COMMAND TP,"'PPON-Popup Page 1'"
Opens Popup Page 1.
Syntax:
"'QBEEP'"
Example:
SEND_COMMAND TP,"'QBEEP'"
Stops all beeps, including "'ABEEP'", "'ADBEEP'", and AXlink beeps.
Saved data is not cleared.
Syntax:
"'RESET'"
Example:
SEND_COMMAND TP,"'RESET'"
Resets the touch panel.
Syntax:
"'SETUP'"
Example:
SEND_COMMAND TP,"'SETUP'"
Flips the touch panel to the Setup page.
ViewPoint Wireless Touch Panels