Cisco 7246 - uBR Router Hardware Installation Manual page 77

Chapter 3 Installing the Cisco uBR7200 Series Router
Figure 3-9
Rack-mount bracket
Figure 3-10
Rack-mount bracket
Thread four M4 x 6-mm Phillips flathead screws through the rack-mount bracket and into the side of the
Step 3
chassis. Use a number 2 Phillips screwdriver to tighten the screws.
Repeat Step 1 through Step 3 for the other rack-mount bracket.
Step 4
OL-5421-03
Installing the Rack-Mount Brackets so the Front of the Chassis Is Flush with the Rack
Installing the Rack-Mount Brackets so the Front of the Chassis Protrudes Out of the
Rack
Cisco uBR7200 Series Universal Broadband Router Hardware Installation Guide
Installing the Brackets on the Chassis
3-9