Related Manuals for M&C SP3200 RS/HEX5 08 Series
Summarization of Contents
Declaration of Conformity
CE - Certification
Product compliance with EU directives (ATEX, EMC, LVD, RoHS) and relevant standards.
Declaration of Conformity Document
Information on obtaining the official EU Declaration of Conformity document.
Safety Information
General Safety Precautions
Fundamental safety measures for device operation, installation, and maintenance.
Intended Use
Specifies the correct and intended operational conditions and parameters for the probe.
Information for Use in Hazardous Areas
EX-Certificate and Installation
Guidelines for safe installation and operation in hazardous areas based on EX-certificate.
Terms and Signals Used in this Manual
Warning Symbols and Definitions
Explains the meaning of warning symbols, signals, and key terms used in the manual.
Description
SP3200V and SP3200 (Combustible Gases and Dust)
Details the SP3200V and SP3200 types for combustible gases and dust applications.
Options
Back Purge Unit Type /RS
Describes the functionality and components of the back purge unit type /RS.
Option /R, /BB and /BB-F
Explains options for test gas feeding or back purging via check valves.
Option /C/I
Details the option for test gas feeding with a shut-off valve.
Option 2-Way Ball Valve /VA
Describes the external shut-off ball valve for service work.
Option Spun Glass Cartridge /FW
Explains the alternative filter element for dusty applications.
Option /3VA Test Gas Feeding and Back Purging
Details the 3/2-way ball valve for back purging and test gas feeding.
Ball Valve Drive MS1
Lists available pneumatic drives for ball valves.
Option /2X Second Sample Gas Outlet
Describes the option for an additional sample gas outlet.
Option /Pt100: Additional Pt100
Details the Pt100 sensor for external temperature control.
Probe Heating
Explains the probe heating options and their temperature ranges.
Technical Data
Maximum Surface Temperature
Provides maximum surface temperature limits based on temperature classes.
Preparations for Installation
Site Condition Checks
Ensures site conditions match product requirements and safety standards.
Sampling Point Selection
Guidelines for selecting an optimal and accessible sampling point.
Installation
Recommended Mounting Position
Guidance on probe mounting for optimal functioning and safety.
Connection of the Sample Line
Details how to connect the sample line to the probe.
Electrical Connection
Supply Voltage and Protection
Ensures correct supply voltage and necessary short circuit protection.
Maintenance
General Maintenance Precautions
Safety notes for working on the probe during operation.
Filter Element Replacement
Step-by-step guide for replacing the filter element.
Pre-filter Replacement
Instructions for removing and cleaning the pre-filter.
Probe Cleaning
Guidance on inspecting and cleaning the probe.
Risk Assessment
Hazard Identification and Mitigation
Details risks during assembly, operation, and maintenance, and mitigation measures.
Need help?
Do you have a question about the SP3200 RS/HEX5 08 Series and is the answer not in the manual?
Questions and answers