Chapters
Table of Contents
Related Manuals for Heta INSPIRE 55HK
Summary of Contents for Heta INSPIRE 55HK
- Page 1 OPERATING AND INSTALLATION INSTRUCTIONS INSPIRE 40-40H / 45-45H / 55-55H-55HK STOVE is exempt for use in smoke control areas when burning dry wood ECODESIGN READY www.heta.dk DANISH DESIGN . DANISH QUALITY . DANISH PRODUCTION...
-
Page 2: Table Of Contents
Congratulations on your new wood stove, we are confident that you will be more than satisfied with your new Heta stove. Especially if you follow the following advice and instructions. Inspire 40-40H, 45-45H and 55-55H-55HK (with cooking plate) wood stoves are ap- proved according to EN 13240, NS 3058 and 3059. -
Page 3: Before Installation
It is important that upon receipt check your Heta product completely and report any damage or defects to your dealer. The packaging must be disposed of as follows: Wood is untreated and able to burn in the stove. - Page 4 Inspire 55HK 4025-0007 Nr. 0023-9002 Inspire 40/40H- 45/45H-55/55H/55HK Ash pan handle 1020-0001 Data plate 8150-0000-DK DOP-Inspire 40 Indsats-2215-2016 Heta A/S Jupitervej 22 7620 Lemvig Denmark 2016 Produktions år: DS/EN 13229/A2:2004/NS 3058/3059 Produkt beskrivelse Serie nr: Inspire 40 Indsats Lukket ildsted For indbygning Brændsel...
-
Page 5: Operating Instructions
The stove is safety tested with a load of wood - max The stove paint is fully cured from the factory, 2.0 kg Inspire 40-40H but a minor unpleasant odour could still arise. 2.2 kg Inspire 45-45H 3.0 kg Inspire 55-55H-55HK 1.3 Regulating the air flow... -
Page 6: Emptying The Ash
For emptying the ash pan - use the supplied stove and/or chimney cools down too much, it handles 1020-0001 use of the ashtray tool, see may be necessary to use the start-up air and Fig. 7. possibly have the door ajar. The wood will then ignite within a very short time It is an advantage for the next firing to leave a (Typically 1 to 3 minutes). -
Page 7: Draft Conditions In The Chimney
• Air tight house (lack of combustion air supply) • Poorly placed chimney for the surroundings, Minimum chimney draft for Inspire 40-40H: 13 pascal, Inspire 45-45H: 12 for ex. the ridge and trees may cause pascal and Inspire 55-55H-55HK: 12 pascal. -
Page 8: Operating Problems
dry wood in your stove. Never use your stove of about 4.18 kW / hour per kg, and one litre to burn driftwood, as this may contain a lot of heating oil contains about 10 kW / hour. salt which can damage both the stove and the release chimney. -
Page 9: Troubleshooting
1.13 Troubleshooting table Fault Cause Troubleshooting Solution Inadequate chimney draft. Lighting problems. When the You can test using a lighter whether Improve the chimney. The chimney only has stove is cold, smoke seeps flame is drawn into the combustion sufficient draft when it is hot. into the room. -
Page 10: Maintenance
1.14 Maintenance 1.15 Cleaning the glass The surface of the stove is treated with a heat- Incorrect firing, for example using wet wood, resistant paint. The stove should be cleaned can result in the viewing window becoming co- with a damp cloth. vered in soot. -
Page 11: Cleaning/Replacing Bicks After Chimney Sweeping
Note: it may be necessary to clean/vaccum the holes and air ducts behind the rear stone Order of removing Fire bricks. Inspire 55-55H-55HK Inspire 40-40H + 45-45H Replace in reverse order. Starting with Fig. 6. -
Page 12: Parts Inspire 40-40H
1.18 Parts Inspire 40-40H Stove - 5 x2 - 22 13 - 14 - 15 - - 21 - 16 Pos. No. Name Qty. Pos. No. Name Qty. 1 0016-0031 Handle 0030-0201 Shaking grate, Ø195 mm 1 2 1013-0529 Glass clips... -
Page 13: Parts Inspire 45-45H
1.19 Parts Inspire 45-45H Stove - 5 x2 13 - - 10 - 22 15 - - 17 - 21 18 - 16 - - 11 19 - - 20 - Pos. No. Name Qty. Pos. No. Name Qty. 1 0016-0031 Handle 0030-0201 Shaking grate, Ø195 mm 1... -
Page 14: Parts Inspire 55-55H-55Hk
1.20 Parts Inspire 55-55H-55HK Stove - 5 x2 13 - - 10 15 - 18 - - 17 - 21 16 - - 22 19 - - 20 - - 11 Pos. No. Name Qty. Pos. No. Name Qty. 1 0016-0031 Handle 0030-0201 Shaking grate, Ø195 mm 1... -
Page 15: Stove Data Table En 13240
Therefore, the duration of the warranty is 5 years on this product, covering manufactu- rer’s defects, 1 year on paint adhesion defects from purchase date from Heta and a 3 months total warranty for seals, vermiculite and glass from the date of sale from the dealer. -
Page 16: Installation Instructions
Installation Instructions Contents Installation instructions ..............17 Distance requirements ..............17 Floor ....................17 Chimney connection ................. 17 Combustion air and ventilation ............18 Stovedrawings/measurments ............19 Clearances for installation - EN 13240 40-45-55 ......20 Clearances for installation - EN 13240 40H-45H-55H-55HK .....21 Mounting the flue collar .............. -
Page 17: Installation Instructions
We recommend that you let a professional Heta dealer install the stove. Alter- In front of the fireplace insert, the substrate natively, you can ask the local chimney sweep must consist of non-combustible material, for before installation. -
Page 18: Combustion Air And Ventilation
fireproof material and / or cordance with building regulations (Doc J Oct beading. Heta A/S stresses that it is of utmost 2010) especially when installing in newer build importance that this is done correctly with very properties when the stove is not going to be in- tight joints. -
Page 19: Stovedrawings/Measurments
2.5 Stovedrawings/measurments Type Inspire 40 Inspire 40H Inspire 45 Inspire 45H Inspire 55 Inspire 55H F: Measurements to openings Stovedrawings/measurments Inspire 55HK For top outlet For rear outlet Cooking area... -
Page 20: Clearances For Installation - En 13240 40-45-55
2.6 Clearances for installation EN 13 240 - Inspire 40-45-55 Not combustible material Combustible material - Insulated flue Min. The dimensions are the minimum dimensions, unless otherwise stated. Snit A-A Snit B-B Clearances Stove Distance to flamable materials Minimum dimensions... -
Page 21: Clearances For Installation - En 13240 40H-45H-55H-55Hk
2.7 Clearances for installation EN 13 240 - Inspire 40H-45H-55H Not combustible material Combustible material - Insulated flue Min. The dimensions are the minimum dimensions, unless otherwise stated. Snit A-A Min. 300 Inspire 55 HK Snit B-B Clearances Stove Distance to flamable materials Minimum rear the at the... -
Page 22: Mounting The Flue Collar
2.8 Mounting of the flue collar 4025-0007- 2.9 Changing to a back outlet 4012-0004 - 4025-0007-... -
Page 23: Mounting Of Vertical Flue Adaptor Inspire 55Hk
2.10 Mounting of vertical flue adaptor - Inspire 55HK Vertical Flue Adaptor 6000.012396... - Page 24 ”unauthorised devolved administrations. fuel” for use within a smoke control area unless The Inspire 40 have all been recommended as it is used in an ”exempt” appliance (”exempted” suitable for use in smoke control areas when from the controls which generally apply in the burning dry wood logs.
-
Page 25: Eu Declaration Of Conformity
Adress Jupitervej 22, DK 7620 Lemvig EU Declaration of Conformity E-mail heta@heta.dk Website www.heta.dk DoC Inspire 40 1858-2014 Telephone +45 9663 0600 Product fiche Model identifier Inspire 40, 40H The identified product described above is in Notified body relevant to the assessment and verification of... - Page 26 Certifikat no. 1987 Manufacturer Heta A/S Ecodesign Adress Jupitervej 22, DK 7620 Lemvig EU Declaration of Conformity E-mail heta@heta.dk Website www.heta.dk DoC Inspire 45 1987-2014 Telephone +45 9663 0600 Product fiche Model identifier Inspire 45, 45H The identified product described above is in Notified body relevant to the assessment and verification of...
- Page 27 Certifikat no. RRF-40 15 3900 Manufacturer Heta A/S Ecodesign Adress Jupitervej 22, DK 7620 Lemvig EU Declaration of Conformity E-mail heta@heta.dk Website www.heta.dk DoC Inspire 55 RRF-40 15 3900-2015 Telephone +45 9663 0600 Product fiche Model identifier Inspire 55, 55H, 55HK The identified product described above is in...
Need help?
Do you have a question about the INSPIRE 55HK and is the answer not in the manual?
Questions and answers