Page 1
INSPIRE 40/45 APPROVED FOR USE IN SMOKE CONTROL AREAS WHEN BURNING DRY WOOD LOGS OR AUTHORISED FUELS www.heta.dk www.heta.dk Installation and Operating Instructions for Inspire 40/45 Pevex1020/AH/ver1:Jan 2013 Pevex1020/AH/ver1:Jan 2013...
90 degrees) Take care to surface used to cover the floor area ensure that children cannot must match national and local regula- come into contact with it. tions. (See table on page 8) Installation and Operating Instructions for Inspire 40/45 Pevex1020/AH/ver1:Jan 2013...
Reduced draft can occur lecting on the exterior surface of the when: stove. Changing smoke outlet from • The difference in temperature top-mounted to rear-mounted (see fig. Installation and Operating Instructions for Inspire 40/45 Pevex1020/AH/ver1:Jan 2013...
100% wood fumes and smoke. Correct firing with a moisture content of 18% using well seasoned wood provides optimal heat output and maximum Installation and Operating Instructions for Inspire 40/45 Pevex1020/AH/ver1:Jan 2013...
Call the fire department. with the secondary air supply fully open to make sure that the chimney is Airflow regulation thoroughly heated. To adjust combustion airflow, use the Installation and Operating Instructions for Inspire 40/45 Pevex1020/AH/ver1:Jan 2013...
Page 6
The wood will light in 2/3 minutes. Adjust the air slider for optimum combustion. Installation and Operating Instructions for Inspire 40/45 Pevex1020/AH/ver1:Jan 2013...
Do not leave the airsliders complet- ely open: Operation with the airsli- Installation and Operating Instructions for Inspire 40/45 Pevex1020/AH/ver1:Jan 2013...
12mm non combustible hearth. That means the room temperature plus 65 Deg Celcius. The nominal output is the output to which the stove has been tested. The test was carried out with the secondary air 65% open. Installation and Operating Instructions for Inspire 40/45 Pevex1020/AH/ver1:Jan 2013...
The Inspire 40/45 has a nominal outside fresh air supply. output of less than 5kW and does not need additional ventilation in older properties where it will be ventilated by natural leakage. Installation and Operating Instructions for Inspire 40/45 Pevex1020/AH/ver1:Jan 2013...
Any unauthorised modifica • The smoke baffle tion of the stove and any use • The glass of non-original spares will • The sealing rope void the guarantee. • The grate frame Installation and Operating Instructions for Inspire 40/45 Pevex1020/AH/ver1:Jan 2013...
Page 11
Cleaning after sweeping the chimney and replacing the stones. Fig 3-7 Changing to back smoke outlet Fig. 8-15 Installation and Operating Instructions for Inspire 40/45 Pevex1020/AH/ver1:Jan 2013...
Page 12
Ministers in the de- of smoke control areas and you can volved administrations for those coun- contact them for details of Clean Air tries. Separate legislation, the Clean Act requirements. Installation and Operating Instructions for Inspire 40/45 Pevex1020/AH/ver1:Jan 2013...
Need help?
Do you have a question about the Inspire 40 and is the answer not in the manual?
Questions and answers