The operating systems supported may not be supported by your server board. See the
Tested operating system list for your server board at
http://support.intel.com/support/motherboards/server/.
To make sure the RAID module supports your operating system, see also the Tested
Hardware and Operating System List for the Intel
SROMBSASMR.
Usability
•
Small, thin cabling with serial point-to-point 3.0 Gbps data transfer rates.
•
Support for non-disk devices and mixed capacity drives.
•
Support for intelligent XOR RAID levels 0, 1, 5, 6, 10, 50, and 60.
•
Dedicated or global hot spare with auto rebuild if an array drive fails.
•
User defined stripe size per drive: 8, 16, 32, 64, 128, 256, 512, or 1024 KB.
•
Advanced array configuration and management utilities provide:
— Online Capacity Expansion (OCE) adds space to existing drive or new drive.
— Online RAID level migration (upgrade of RAID mode may require OCE)
— Drive migration
— Drive roaming
— No reboot necessary after expansion
•
Upgradeable Flash ROM interface.
•
Allows for staggered spin-up, hot-plug, and lower power consumption.
•
User specified rebuild rate (percent of system resources to use from 0-100%).
Caution: Exceeding 50% rate may cause operating system errors due to waiting for
•
Background operating mode can be set for Rebuilds, Consistency Checks,
Initialization (auto restarting Consistency Check on redundant volumes), Migration,
OCE, and Patrol Read.
Redundancy and Error Handling
•
In-band and out-of-band SES2.
•
Enclosure management support.
•
Fault indicators per drive.
•
Drive coercion (auto-resizing to match existing disks).
Intel® Integrated RAID Module SROMBSASMR Hardware User's Guide
See
Appendix A: Drive Roaming and Drive Migration Install
OCE and RAID migration.
controller access.
®
Integrated RAID Module
for limitations on
3