Related Manuals for Lantech IPES Series
Summarization of Contents
Chapter 1 Hardware Features
Standards and Protocols
Lists supported IEEE standards, flow control, spanning tree, and communication protocols.
Performance and Connectivity
Details switch architecture, transfer rates, MAC addresses, connectors, cables, and DI/DO.
Indicators, Power, and Environment
Covers LED indicators, power supply, operating conditions, case dimensions, and EMI/stability compliance.
Chapter 2 Hardware Description
IP Protection Rating
Details the IP Code classification for solid particle and liquid ingress protection levels.
LED Indicators Overview
Explains the status and meaning of system and port LEDs on the switch.
Chapter 3 Hardware Installation
General Installation Steps
Outlines the general procedure for unpacking and connecting the switch.
DIN-Rail Mounting
Provides instructions and illustrations for mounting the switch using a DIN-rail.
Wall Mount Plate Mounting
Details the process for attaching the switch to a wall using a mounting plate.
Wiring Power Inputs
Explains how to connect DC power wires to the terminal block for power input.
Fault Alarm Contact Wiring
Guides on connecting wires to the fault alarm contacts for failure detection.
Cabling and Transceiver Connection
Covers Ethernet cabling, SFP module insertion, and fiber optic cable connection.
Chapter 4 Network Application
ITU G.8032 Scheme
Explains the Lantech G.8032 protocol and its benefits for ring networks.
Ring Coupling Configurations
Illustrates redundant and multiple ring coupling topologies.
Multiple Rings and Dual Homing
Shows dual ring, multiple rings, and dual homing network configurations.
Chain Topologies
Describes various chain configurations like multiple chain, cascade, and chain-in-chain.
Chapter 5 Console Management
Connecting to the Console Port
Details the RS-232 to RJ-45 cable connection and pin assignments.
Login via Console Interface
Guides on configuring terminal emulation parameters and logging into the switch.
Need help?
Do you have a question about the IPES Series and is the answer not in the manual?
Questions and answers