Drive chain slack adjustment (MXU 150/50)
1.Loosen the upper and lower axle holding bolts
(1).
2.Turn the adjusting nut (2), to decrease or
increase chain slack.
3.Retighten the upper and lower axle holding
bolts.
Tightening torque:
Axle holding bolts (upper):
70 Nm (7.0 m-kg, 48 ft-lb)
CAUTION:
Too little of chain slack will overload the
engine and other important parts. Keep the
slack within the specified limit.
(1) Axle holding bolt x 4
(2)
(2) Adjust nut
163
(1)