Battery - KYMCO MXU 150 Owner's Manual

On-road
Hide thumbs Also See for MXU 150:
Table of Contents

Advertisement

BATTERY

Your ATV battery is located in a compartment under
the seat. The battery is sealed, so it is not necessary
to check the electrolyte level or add distilled water. If
the battery seems weak, see your authorized
KYMCO dealer for information on recharging or
replacement. If you replace the battery, choose one
that is sealed and equivalent to the original. Be sure
to read and follow all safety precautions indicated on
the battery.
CAUTION:
Do not attempt to remove the caps from the
battery cells as this may damage the battery.
Although the battery is sealed, it vents explosive
gases and should be handled with appropriate
care.
POTENTIAL HAZARD
Allowing open flames or sparks near the
battery.
WHAT CAN HAPPEN
Gases may explode and possibly cause
injury.
HOW TO AVOID THE HAZARD
Do not allow open flames or sparks near the
battery.
NOTE:
When the ATV is to be stored for an extended
period, remove the battery from the vehicle and
charge it fully. Then store it in a cool, dry place.
If the battery is to be left on the vehicle,
disconnect the negative cable from the battery
terminal.
Battery posts, terminals and related accessories
contain lead and lead compounds. Wash
hands after handling.
169
WARNING

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mxu 250

Table of Contents