DRIVE CHAIN SLACK CHECK (MXU 250)
Inspect the drive chain while all tires are
touching the ground. Check the slack at the
position shown in the figure. The normal vertical
deflection is approximately 30 40 mm (1.18
1.57
in). If the deflection exceeds 40 mm (1.57
in), adjust the chain slack.
-
-
(A) 30 40 mm (1.18 1.57in)
-
-
125
Drive chain slack adjustment (MXU 250):
1. Loosen the hub stopper bolt (1) and two axle
hub holding bolts (2).
(1) Hub stopper bolt
(1)
(2)
(2) Axle hub holder bolt