Related Manuals for Lincat Silverlink 600 DF4/N
Summarization of Contents
Installation and Commissioning
Supply Pressures
Details gas supply connection and pressure checks for the appliance.
FASCIA PANEL REMOVAL
Instructions for removing the front control panel for access to internal components.
ADJUSTING BURNER PRESSURE
Steps for setting and adjusting the gas burner pressure using test points.
Operation Instructions
Operator precautions
Key safety guidelines and actions for users during appliance operation.
Notes on frying
Advice on oil quality, life expectancy, and handling frozen food for optimal frying.
Preparation for use
Steps to prepare the fryer for operation, including closing drain valves.
Lighting Sequence
Step-by-step guide on how to safely light the pilot and main burners of the fryer.
Standby
How to leave the appliance in a ready state, maintaining the pilot flame.
Safety cut-out
Explanation of the safety thermostat function and how to reset it after operation.
Shut down
Procedure for turning off the main burners and the entire unit.
Drainage
Instructions for safely draining the hot oil from the fryer tank.
Servicing
BASE AND HOBTOP SEPARATION
Steps for safely separating the main body from the base for servicing access.
Component Replacement
High limit thermostat
Procedure for replacing the high limit thermostat, including panel removal.
Control thermostat
Steps for replacing the control thermostat and its phial.
Control Valve
Guide for removing and replacing the gas control valve.
Separating Pilot assembly
Instructions for accessing and separating the pilot assembly for maintenance.
Thermocouple
Steps to remove and replace the thermocouple from the pilot assembly.
Thermopile
Instructions for removing and replacing the thermopile.
Electrode
Procedure for removing and replacing the igniter electrode.
Fault Finding
Piezo Ignitor not sparking.
Troubleshooting flowchart for igniter issues, guiding through checks and replacements.
Pilot burner will not light or stay lit.
Troubleshooting guide for pilot light problems, covering gas supply and components.
High limit thermostat operates.
Diagnostic steps for when the high limit thermostat is triggered, checking oil temperature and controls.
Need help?
Do you have a question about the Silverlink 600 DF4/N and is the answer not in the manual?
Questions and answers