Lincat Silverlink 600 DF4/P User, Installation And Servicing Instructions
Lincat Silverlink 600 DF4/P User, Installation And Servicing Instructions

Lincat Silverlink 600 DF4/P User, Installation And Servicing Instructions

Advertisement

Quick Links

User, Installation and Servicing Instructions
Silverlink 600 Gas Fryers
DF4-A007
IS676 ECN4560

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Silverlink 600 DF4/P and is the answer not in the manual?

Questions and answers

Summarization of Contents

Installation and Commissioning
Supply Pressures
Describes gas supply connection and pressure checks for the appliance.
FASCIA PANEL REMOVAL
Details the procedure for removing the appliance's front control panel.
ADJUSTING BURNER PRESSURE
Explains how to adjust the gas burner pressure settings.
Operation Instructions
Operator Precautions
Lists essential safety precautions for operating the fryer.
Notes on Frying
Provides guidance on best practices for using frying oil.
Preparation for Use
Outlines the necessary steps before operating the appliance.
Lighting Sequence
Step-by-step guide for lighting the appliance's pilot and main burners.
Standby
Explains how to put the appliance into standby mode and resume operation.
Safety Cut-out
Describes the function and reset procedure for the safety thermostat.
Shut Down
Details the correct procedure for turning off the appliance.
Drainage
Instructions on safely draining the oil from the fryer tank.
Cleaning
OPERATOR PRECAUTIONS
Safety warnings related to cleaning the appliance.
Servicing
SERVICE ACCESS
Information on accessing internal components for servicing.
BASE AND HOBTOP SEPARATION
Procedure for separating the appliance's main sections for access.
Component Replacement
High Limit Thermostat
Instructions for replacing the high limit thermostat.
Control Thermostat
Steps for removing and replacing the control thermostat.
Control Valve
Procedure for replacing the gas control valve assembly.
Separating Pilot Assembly
How to access and remove the pilot light assembly.
Thermocouple
Steps to replace the thermocouple component.
Thermopile
Instructions for replacing the thermopile.
Electrode
Procedure for replacing the igniter electrode.
Fault Finding
Piezo Ignitor Not Sparking
Troubleshooting guide for a non-sparking piezo igniter.
Pilot Burner Will Not Light or Stay Lit
Steps to diagnose and fix pilot burner ignition issues.
High Limit Thermostat Operates
Diagnostic steps when the high limit thermostat is activated.
Service Information
DECLARATION
Statement of compliance with gas appliance regulations.
GUARANTEE
Details of the product warranty terms and coverage.

Table of Contents