Remote Controller Rc101 - Marantz AV8003 User Manual

REMOTE CONTROLLER RC101

The included remote controller can be used in zone
systems. Using this remote controller, you can
operate the unit through infrared receivers or the
infrared receptor of Marantz products in multiple
ZONEs. The SOURCE ON/OFF button and control
buttons are used in common across different input
source components.
The input source controlled with the remote controller
changes when one of the input selector buttons is
pressed.
⁄7
⁄6
z
x
c
v
⁄5
⁄4 b
n
⁄3 m
⁄2
,
.
⁄0
⁄1
z
POWER ON and OFF buttons
(When Zone A/B mode is selected)
These buttons are used to turn on or off, for the
ZONE control or zone speaker control of the unit.
(When Zone D (MAIN ZONE) mode is selected)
These buttons are used to turn on or off, for the unit
in main zone.
x
SOURCE ON and OFF buttons
These buttons are used to turn on or off a specifi c
source (such as a DVD player) independently from
the rest of the system.
(When NETWORK mode (AUX2) is selected)
SOURCE ON button
This button is used to select the screen resolution.
SOURCE OFF button
This button is used to return to the previous screen.
c
AMP - SOURCE /Numeric buttons
SOURCE buttons
These buttons are used to switch the source of
the unit. Each time a source button is pressed, the
remote control changes to the source which was
pressed.
This remote controller can control 12 types of
equipment. To change the unit source, press this
button twice within two seconds. The signal is sent
when it is pressed the second time.
Notes:
• Press AUX2 to switch to NETWORK function.
• The T2 button is not used for this unit.
(When Zone A/B mode is selected)
These buttons are used to select the source for the
zone/zone speaker control of the unit.
(When Zone D (MAIN ZONE) mode is selected)
These buttons are used to select the source for the
unit in main zone.
Numeric buttons
Use these buttons only for preset setting.
v
AMP - VOL +/- buttons
(When Zone A/B mode is selected)
These buttons are used to adjust the volume for the
zone control or zone speaker.
(When Zone D (MAIN ZONE) mode is selected)
These buttons are used to adjust the volume for the
unit in main zone.
b
AMP - MUTE button
(When Zone A/B mode is selected)
This button is used to mute the audio for the zone
control or zone speaker control of the unit.
(When Zone D (MAIN ZONE) mode is selected)
These buttons are used to mute the audio for the unit
in main zone.
n 3, 4, 1, 2 (CURSOR) / ENTER
buttons
These buttons are used when operating cursor of a
source.
(When Tuner mode (T1) is selected)
PRESET +/ PRESET - buttons
Used to select a preset station up and down.
TUNE 3 /TUNE 4 buttons
Used to tune a frequency station up and down.
m
SLEEP button
(When Zone A/B mode is selected)
This button is used for setting the sleep timer of zone
control mode.
(When Zone D (MAIN ZONE) mode is selected)
This button is used for setting the sleep timer of the
unit receiver in main zone.
,
CONTROL buttons
These buttons are used when operating PLAY, STOP,
PAUSE and other commands of a source.
(When TUNER mode (T1) is selected)
P.SCAN button
Used to start preset scan.
CLEAR button
Used to stop preset scan.
.
A/B/C/D buttons
(When TUNER mode (T1) is selected)
Used to select the band of tuner (AM/FM).
Note:
The C (XM) and D (DAB) button are not used for
this unit.
(When the other source is selected)
Reserve key for the learning commands.
ENGLISH
⁄0
SET button
This button is used to enter learn mode, preset mode
and clone mode.
⁄1
ZONE button
This button is used to set the zone area.
• Zone A
• Zone B
• Zone C (The unit does not use this zone.)
• Zone D (MAIN ZONE)
⁄2
DISC+/T.MODE
(When TUNER mode (T1) is selected)
Used to select auto stereo mode or mono mode
when the FM band is selected.
The "AUTO" indicator lights in the auto stereo mode.
(When CD/DVD/CDR mode is selected)
Used to change the disc for the CD/DVD/CDR
changer.
⁄3
INFO button
(When Zone A mode is selected)
When this button is pressed, the current setting for
selected zone control of the unit is displayed on the
TV monitor.
(When Zone D (MAIN ZONE) mode is selected)
When this button is pressed, the current setting for
the unit are displayed on the TV monitor.
⁄4
MENU/INPUT button
(When DVD mode is selected)
Used to menu command.
(When TV mode is selected)
Used to select the TV video input.
CH 3/4 buttons
⁄5
These buttons are used to change channels in TV
mode and DSS mode.
⁄6
SEND indicator
Indicates when the remote controller is transmitting
a signal.
⁄7
LEARN indicator
Indicates when the remote controller is in the LEARN
mode.
9