Remote Controller - Marantz PM6003 User Manual

REMOTE CONTROLLER

Using this remote controller, you can control the
PM6003 and Marantz CD players, DVD players,
tuners, tape decks etc. that have a remote control
receptor. The operations possible by remote
controller may differ with each component;
therefore see the instruction manual that came
with the component.
The remote controller buttons are laid out as shown
below.
v
z
b
x
c
b
z POWER ON/STANDBY buttons
a. MAIN POWER ON button
Turns the PM6003 power on when it is in the
standby mode.
b. MAIN POWER STANDBY button
Sets the PM6003 power to the standby mode when
it is set to the power-on mode.
c. SOURCE POWER button
Switching the mode of a CD player, tuner, CD-R
or other Marantz component equipped with a
power standby function between power-on and
standby is enabled by pressing this button after the
FUNCTION SELECT button corresponding to the
component has been pressed.
When this button is pressed after pressing the
TUNER button, the tuner's power is turned on;
when it is pressed again, the tuner is set to the
standby mode.
When this button is pressed after pressing the AMP
button, the PM6003 is switched from the power-on
mode to the standby mode or vice versa.
* The remote controller cannot be used to turn the
primary power of the amplifi er ON and OFF.
x Input selector buttons
• Input source Buttons
These buttons are for directly selecting the input
source.
Caution
Some input jacks of this unit and the corresponding
input selector buttons on the remote controller
differ, as shown below.
Buttons on the
The unit
remote controller
AUX/DVD AUX, DVD
RECORDER2 TAPE, MD
For the input sources shown in the table above,
although the same jacks are used for two types of
sources on the unit, separate buttons are provided
on the remote controller.
When using the remote controller for operation of
a Marantz component connected to the unit, select
the input source fi rst, then perform operations.
• INPUT 5 Button
This button is for forward-feeding the input source
indications to select a desired source.
The input source indication, which is displayed on
the function indicator on the main frame, is fed to
the right.
• INPUT ∞ Button
This button is for backward-feeding the input source
indications to select a desired source.
The input source indication, which is displayed on
the function indicator on the main frame, is fed to
the left.
ENGLISH
NAMES AND FUNCTIONS
c VOLUME adjustment buttons
• MUTE Button
This button activates the mute function. Pressing
this button again releases the MUTE function.
The MUTE function can also be released by pressing
either the VOLUME + or – buttons.
• VOLUME + Button
This button increases the volume level.
• VOLUME – Button
This button decreases the volume level.
v SOURCE DIRECT button
This button turns SOURCE DIRECT mode ON and
OFF.
b Component operating buttons
These buttons are for performing basic operations
of a Marantz CD player, DVD player, etc. The
function of each button changes to match the
component selected as the input source using the
input selector buttons.
5