Hdmi; Xm Satellite Radio; Sirius Satellite Radio; Hd Radio Reception - Marantz AV8003 User Manual

ENGLISH

HDMI

SYMPTOM
The display does not appear The connected monitor or projector does
over an HDMI connection. not support HDCP.
The HDMI input of on the TV is not on.
The HDMI output on the source
component (DVD, Set Top Box, etc.) is
not on.
The HDMI mode is not correctly set on
the unit.
The HDMI output video resolution
of the source component (DVD, Set
Top Box, etc.) does not match the TV
specifi cations.
The device is connected with a non-
standard HDMI cable.
Power to the unit is off. (When the unit is
on standby, HDMI connections cannot be
turned on.)
The connection between HDMI
components was not authenticated.
Time is needed for the display of The connection is being authenticated
an HDMI connection to appear. between the HDMI devices.
Audio is not played back over an The HDMI audio output of the source
HDMI connection. component (DVD, Set Top Box, etc.) is
not on.
The signal format of the source component
(DVD, Set Top Box, etc.) is not supported
by the unit.
This unit is set to the HDMI audio
"THROUGH" mode.
DVD-Audio is not played back The DVD player does not support CPPM,
over an HDMI connection. therefore it cannot output HDMI audio.
98
CAUSE REMEDY
A video signal is not output except when using an
HDCP-compatible device.
Either connect to an HDCP-compatible device or use
analog video connections.
Set HDMI input so that it turns on, as explained in the
TV's instruction manual.
Set HDMI output so that it turns on, as explained in the
source component's instruction manual.
Set HDMI input on the FUNC INPUT SETUP menu as
explained on page 24.
Set the resolution so that it matches, as explained in
the instruction manuals of both components.
A 5 m or shorter cable is recommended to ensure stable
operation and prevent image quality deterioration.
Turn on the power to the unit.
Shut off and then turn the power back on to the unit,
TV and source component.
There is nothing wrong with the system. Some HDMI
devices require time for authentication.
Set the HDMI audio output so that it turns on, as
explained in the source component's instruction
manual.
Set the HDMI audio output so that it can connect
to the unit, as explained in the source component's
instruction manual.
In the "THROUGH" mode, sound is not produced from
the unit. Set it to "ENABLE". (see page 35)
• Use a DVD-Audio player that supports CPPM.
• Turn on PCM downsampling on the DVD player.
• Use an analog connection.

XM SATELLITE RADIO

If a problem should arise, fi rst check the following.
1. Are the connections correct?
2. Have you operated the receiver according to the operating instructions?
3. Are the speakers and other components operating properIy?
If this unit is not operating properly, Check the items listed in the table beIow. Should the problem persist, there
may be a malfunction. Disconnect the power immediately and contact your store of purchase.
SYMPTOM
"ANTENNA" is displayed. XM terminal and the XM Mini-Tuner and
Home Dock is not properly connected.
"NO SIGNAL" is displayed. The signal cannot be received.
Receiving only XM channels 0 and 1. The XM Tuner is not activated.

SIRIUS SATELLITE RADIO

SYMPTOM
"ANTENNA" is displayed Antenna is not properly connected.
"TUNER ERR" is displayed. SIRIUS Connect tuner is not properly
connected.
"ACQUIRING" is displayed. The signal cannot be received.
"SUB_UPDT" is displayed Unit is updating subscription
"UPDATING" is displayed Unit is updating channel map.
"CALL SIRIUS" is displayed You have not subscribed for the selected
channel.
"INVALID" is displayed Selected channel is not available/does
not exist.
"FIRM UPDT" is displayed SIRIUS CONNECT is updating software.

HD Radio RECEPTION

SYMPTOM
The signal is not digital, even when Reception is affected by other electrical
receiving from an HD Radio station. fi elds. (AM)
The radio waves from the broadcasting
station are weak. (FM)
The signal sometimes switches from digital Reception is affected by other electrical
to analog or the sound cuts out when fi elds. (AM)
receiving from an HD Radio station.
The radio waves from the broadcasting
station are weak. (FM)
CAUSE REMEDY
Check that the connection are correct.
Reposition your XM Mini-Tuner and Home
Dock.
Contact XM Radio.
CAUSE REMEDY
Check the antenna cable connection is
correct.
Check the 8pin mini DIN cable and AC
adapter connection are correct.
Reposition your SIRIUS Connect tuner
and antenna.
Wait until the encryption code has been
updated.
Wait until the updating is complete.
Call SIRIUS if you want to subscribe.
Select another channel.
Wait until the updating is complete.
CAUSE REMEDY
Try changing location where the AM
indoor antenna is set up.
Install an FM outdoor antenna.
Set the TUNER MODE to Analog Auto
mode or Analog Mono mode.
Note:
In this case you cannot receive a
digital signal. (See page 52)