Table of Contents
Advertisement
Congratulations on your decision to enjoy the finest Aquatic Fitness System available...
Welcome to the growing family of ENDLESS POOLS owners.
Pre-Delivery Instructions
Please take the time to read this booklet carefully, as it will provide you with the information you will need to ensure the safe, secure,
and timely installation of your system. The following sections are guidelines on how to prepare for delivery and set-up of your new
system. Specifically covered are site selection, delivery access, ground preparation, and electrical requirements.
Remember to carefully review the Owner's Manual that accompanies your system, and to register the system's warranty within 10
days of delivery. These items, along with other valuable information, will be found in the Owner's Package which has been placed in
the equipment compartment of your system, where you will also find its serial number.
Watkins Manufacturing Corporation reserves the right to change features, specifications and design without notification and without
incurring any obligation.
DATE PURCHASED: ____________________________________________
DATE INSTALLED: ______________________________________________
DEALER: ______________________________________________________
ADDRESS: _____________________________________________________
TELEPHONE:
____________________________________________________________________
In most cities and counties, permits will be required for the installation of electrical circuits or the construction of exterior surfaces
(decks and gazebos). In addition, some communities have adopted residential barrier codes which may require fencing and/or self-
closing gates on the property to prevent unsupervised access to a pool (or spa) by children under 5 years of age. Your
Fitness System
may be equipped with a locking cover that meets the ASTM F1346-91 Standard for Safety Covers and as a
result, is usually exempt from most barrier requirements. As a general practice, your local Building Department will inform you of any
applicable barrier requirements at the time a permit is obtained for the installation of an electrical circuit. Your ENDLESS POOLS
dealer can provide information on which permits may be required.
ENDLESS POOLS FITNESS SYSTEMS Pre-Delivery Instructions
Aquatic
Advertisement
Table of Contents
Related Manuals for Endless Pools R220
Summarization of Contents
Pre-Delivery Instructions
Permit Requirements and Barrier Codes
Discusses local permits, barrier codes, and potential exemptions for safety covers.
Site Selection and Preparation
Outdoor and Patio Installation
Details foundation requirements for outdoor and patio installations, including concrete pads and decks.
Deck Installation Considerations
Emphasizes checking deck load capacity and consulting engineers for elevated decks.
Indoor Installation Requirements
Covers flooring, drainage, humidity, and ventilation for indoor setups.
Recessed Installation Guidelines
Addresses foundation, underground utilities, crawl space, and flood protection for recessed units.
Delivery Access
Delivery Access and Obstacle Clearance
Details site access, removing obstructions, and vehicle options for delivery.
Model Dimensions for Delivery
Lists width, length, and height for various Endless Pools models to ensure delivery access.
Ground Preparation
Ground Preparation Requirements
Specifies a reinforced concrete pad (6-inch thick) or a deck able to support 250 lbs/sq ft and the need for leveling.
Electrical Requirements
Electrical Service and Circuit Requirements
Details required amperage, voltage, circuit breakers, and the necessity of a subpanel with GFCI.
Wiring and Grounding Specifications
Covers wire gauge, grounding conductor size, and conduit fitting recommendations.
Model-Specific Wiring Diagrams
Provides diagrams for E500, E700, X2000, E550, and E2000 models.
System Specifications
Model Specification Overview
Summarizes footprint, dimensions, water capacity, weight, and electrical requirements for all models.
Services Available From Your Endless Pool Dealer
Dealer Services and Support
Lists services provided by the dealer, including setup, orientation, and maintenance.
Contractor Suggestions
Provides sections to record contact information for electricians, masons, and general contractors.
Need help?
Do you have a question about the R220 and is the answer not in the manual?
Questions and answers