IBM ZVM - FOR LINUX V6 RELEASE 1 Getting Started page 108

Before you begin: You need to set up the programmable operator. See "Steps for
setting up the programmable operator" on page 92. You need to be able to log onto
your Linux virtual machines, but Linux must be shut down.
Perform these steps to automate Linux virtual consoles:
1.
2.
3.
4.
5.
6.
94
z/VM: Getting Started with Linux on System z
Log onto a Linux virtual machine.
If Linux is loaded automatically or is already running:
a. Shut Linux down.
b. Load (IPL) CMS with the ACC (NOPROF option.
1) From the command line, type this command and press the Enter key:
ipl cms
2) When you see the CMS initialization message and VM READ, type this
command and press the Enter key:
i cms
z/VM V6.1.0 2004-07-27 14:44
acc (noprof
Edit the PROFILE EXEC. From the command line, type this command and
press the Enter key:
xedit profile exec a
Go to the bottom of the file. From the XEDIT command line, type this
command and press the Enter key:
====> bot
In the prefix area before the "CP IPL 150 CLEAR" statement, type "i" and
press the Enter key:
i "ACCESS 592 Z"
00009 "CP IPL 150 CLEAR"
Type this line:
"CP SET SECUSER OPERATOR" /* Operator is sec console*/
/* Get to TCP/IP functions */
VM READ VM610A