Changing Parameters Of The Custom Deployment Mode; Closing The Custom Deployment Mode - ACRONIS SNAP DEPLOY 3 - FOR WORKSTATION Manual

14. 4 Changing parameters of the custom deployment mode

To change the templates or the boot menu password, used in the custom deployment mode, you will
have to re-configure the custom deployment mode.
1. If some user-initiated deployment operations are active, either stop the operations or wait until
the operations are completed.
2. Click Custom Deploy Parameters on the sidebar and repeat steps 6-10 in section 14.3.

14. 5 Closing the custom deployment mode

1. If some user-initiated deployment operations are active, either stop the operations or wait until
the operations are completed.
2. Click Switch off the custom deployment mode on the sidebar.
3. In case the custom deployment mode used Acronis PXE Server, the program has to remove
custom boot media from the server. Type in the credentials for the PXE server, if prompted.
© Acronis, Inc 87