Asdcmd Usage Examples; Sample Scenarios; Deploying Images Assigned To Targets - ACRONIS SNAP DEPLOY 3 - FOR WORKSTATION Manual

list
/filename:[file_name]

15.3.4 asdcmd usage examples

asdcmd /create /harddisk:1 /filename:\\server1\folder\arc.tib
/net_user:user1 /net_password:pw1 /log:\\server2\dir\log1.log
/log_net_user:user2 /log_net_password:pw2
This will create an image arc.tib of hard disk 1 in the shared folder \\server1\folder. The operation log
file log1.log will be saved on another share \\server2\dir\. Credentials for both shares are provided.
asdcmd /create /filename:h:\raw.tib /partition:1-2 /raw /log5.txt
This will image partition 1-2 sector-by-sector (raw) and save the image on partition H.
asdcmd /deploy /filename:\\server1\folder\1.tib /password:qwerty
/harddisk:2
This will deploy hard disk 2 from the password-protected image 1.tib located in the shared folder
\\server1\folder to the disk with the same number 2.

15.4 Sample scenarios

15.4.1 Deploying images assigned to targets

Scenario:
An administrator might need to deploy diverse images on each of the target computers.
Solution:
The administrator puts the images in a shared location that can be accessed from each target.
The administrator renames each image according to the target's MAC address. The image
destined to the computer with MAC address 01-02-03-04-05-06 will have the name, say,
image-01-02-03-04-05-06.tib.
The administrator writes a deployment script that can read the target's MAC address and pull
an image with a name corresponding to the MAC address from the shared location. The script
can be executed on any number of targets.
96
With this option, the image content is displayed.
When listing image content, partition numbers may not coincide
with those in the drives/partitions list, if the image does not contain
all the disk partitions. For example, if the image contains partitions
2-3 and 2-5, they will be listed as 2-1 and 2-2.
If the deploy /partition command cannot find a partition in
the image by its physical number, use the /partition:<number
in the image> /target_partition:<physical number
of the target partition> keys. For the above example, to
deploy partition 2-5 to its original place use:
/partition:2-2 /target partition:2-5.
© Acronis, Inc