ACRONIS SNAP DEPLOY 3 - FOR WORKSTATION Manual page 70

While creating bootable media or uploading Acronis Snap Deploy Agent on the PXE server, the
agent can be configured to start automatically on timeout.
5. The agent has to establish network connection to be able to connect to Acronis OS Deploy Server.
A dialog box comes up suggesting that you configure the network connection used by Acronis
Snap Deploy Agent.
By default, the agent will use DHCP auto configuration and connect to the first deploy server that
is found on the network. You can ignore the prompt (click Cancel) if there is a DHCP server and
only one Acronis OS Deploy Server on the network. The agent can be pre-configured to apply the
default settings automatically on timeout.
To configure the network connections manually, click OK in the prompt window. You can set up:
- TCP/IP settings for each network interface of the target computer.
Acronis Snap Deploy Agent uses DHCP auto configuration by default. The manual configuration is
needed if auto configuration is not possible (no DHCP server on the network) or does not succeed.
- The Acronis OS Deploy Server the agent will connect to.
This setting allows you to have multiple deployment servers that perform different functions on
the same network. The deployment server can be specified also when creating bootable media
with Acronis Snap Deploy Agent. If not specified in either way, the server will be found
automatically.
Set the preferable values and click OK.
70
Prompt for configuring the agent on the target side
Configuring the agent on the target side
© Acronis, Inc