Page 1 User's Guide Acronis True Image 9.1 Enterprise Server Compute with confidence www.acronis.com...
Page 2 Copyright © Acronis, Inc., 2000-2006. All rights reserved. “Acronis”, "Acronis Compute with Confidence", “Acronis Snap Restore”, “Acronis Recovery Manager, “Acronis Secure Zone” and the Acronis logo are trademarks of Acronis, Inc. Linux is a registered trademark of Linus Torvalds. Windows and MS-DOS are registered trademarks of Microsoft Corporation.
Page 3 Making telecommunication data transmission of the software. Acronis has the right to terminate this license if there is a violation of its terms or default by the original purchaser. Upon termination for any reason, all copies of the software must be immediately returned to Acronis, and the original purchaser shall be liable to Acronis for any and all damages suffered as a result of the violation or default.
Page 4: Table Of Contents
2.3.2 Firewall setup............................. 15 2.4 R ............15 UNNING CRONIS MAGE NTERPRISE ERVER COMPONENTS 2.4.1 Running Acronis True Image Enterprise Server (local version) ............15 2.4.2 Running Acronis True Image Management Console................15 2.5 R ............15 EMOVING CRONIS MAGE NTERPRISE ERVER COMPONENTS CHAPTER 3.
Page 5 ANAGING BACKUP SERVER 4.5.1 Default settings........................... 34 4.5.2 Set up Administrator profiles......................35 4.5.3 Adding Users and Administrators to Acronis Backup Server database ..........36 4.5.4 Changing User profiles ........................37 4.5.5 Configuring Backup Locations......................38 4.5.6 Managing Archives..........................39 4.6 C...
Page 6 8.1.4 Setting up one-time execution......................75 8.2 M ........................76 ANAGING SCHEDULED TASKS CHAPTER 9. MANAGING ACRONIS SECURE ZONE ................77 9.1 C ......................77 REATING CRONIS ECURE 9.2 R ......................78 ESIZING CRONIS ECURE 9.3 D ......................78 ELETING...
Page 7: Chapter 1. Introduction
Ensures 24 X 7 Uptime With the Acronis Drive Snapshot systems can be imaged while they are in use, supporting 24 by 7 availability. This technology enables the product to backup and image critical operating system files, the master boot record and any partition-based boot records without requiring a reboot.
Page 8: Acronis True Image Enterprise Server Architecture
Disk cloning and new disk deployment Acronis True Image Enterprise Server can be used to clone an image onto multiple servers. For example, a company purchased several servers and needs similar environments on each of them.
Page 9: New In Acronis True Image 9.1 Enterprise Server
Acronis True Image Agent for Linux – Remote backup/restore of Linux-based systems • Back up to/restore from FTP servers • Acronis Snap Restore – A user can start working in seconds while the system is still being restored • Acronis Universal Restore (optional) – Hardware-independent live system restore •...
Page 10: System Requirements And Supported Media
Acronis True Image Enterprise Server • Acronis Bootable Agent – Adding this Agent to the rescue disk or RIS package will enable the administrator to manage the remote computer, booted from this disk/RIS- server, with Acronis True Image Management Console. Thus, they can restore unattended systems, including blade servers, from remote locations •...
Page 11: Supported File Systems
Linux SWAP • • If a file system is not supported or is corrupted, Acronis True Image Enterprise Server can copy data using a sector-by-sector approach. For XFS and JFS file systems partition resizing feature is not supported. 1.4.4 Supported storage media •...
Page 12 Acronis Technical Support. More information about contacting Acronis Technical Support is available at the following link: http://www.acronis.com/enterprise/support/ Copyright © Acronis, Inc., 2000-2006...
Page 13: Chapter 2. Acronis True Image Enterprise Server Installation And Starting
Install Wizard instructions on the screen. Acronis True Image Enterprise Server Install Menu Window To install Acronis True Image Agent for Linux, extract its files to a shared network drive or removable media, assign to these files attribute Executable, then perform installation procedure on a Linux-based system.
Page 14: Extracting Acronis True Image Enterprise Server Components
The remote access to networked computers is allowed according to the security policy set up in the local network. To have remote access to Acronis True Image Agent, the user must be a member of the Administrators or Backup operators group on this computer. To install Acronis components on a remote computer you must be a member of the Administrators group on this computer.
Page 15: Firewall Setup
Programs -> Acronis -> Acronis True Image Enterprise Server -> Acronis True Image Enterprise Server or clicking on the appropriate shortcut on the desktop. If your operating system does not load for some reason, you can run Acronis Startup 3.4 Acronis Startup Recovery Manager.
Page 16: Chapter 3. General Information And Proprietary Acronis Technologies
This procedure is called “creating a disk image,” and the resulting backup archive is often called a disk/partition image. Acronis True Image Enterprise Server stores only those hard disk parts that contain data (for supported file systems). Further, it does not back up swap file information (pagefile.sys) and hiberfil.sys (a file that keeps RAM contents when the computer goes into hibernation).
Page 17: Acronis Secure Zone
Startup Recovery Manager and Acronis Snap Restore features (see below). Acronis Secure Zone is always available for archive creation as long as there is space for the backup file. If there is not enough space, older archives will be deleted to create space.
Page 18: Acronis Startup Recovery Manager
Acronis True Image Enterprise Server. It is especially handy for traveling users. 3.4.2 How to use To be able to use Acronis Startup Recovery Manager at boot time, prepare as follows (you can do it either locally, using Acronis True Image Enterprise Server local version, or remotely, using Acronis True Image Management Console): 1.
Page 19: Backup Locations, Their Quotas And Time Limits
Please be aware, that in fact maximum number of incremental backups includes one initial full backup. For example, if this parameter is set to 5, Acronis Backup Server will create one full backup, then four incremental backups, then again a full backup and so on. For this reason, this parameter is also called “maximum number of backups in an archive”.
Page 20: Operations With Archives
So, User profiles manage the backup server resources allocation by users. 3.5.4 Operations with archives Acronis Backup Server can display a list of backups, stored on the backup server, and sort the list by Location or Owners (users and computers).
Page 21: How To Use
10 minutes. The larger the image size, the more time you save. 3.6.2 How to use To be able to use Acronis Snap Restore in case of system crash, prepare as follows (you can do it either locally, using Acronis True Image Enterprise Server local version, or remotely, using Acronis True Image Management Console): 1.
Page 22: How To Use
Acronis Universal Restore is an optional program feature. It should be purchased separately and installed from a separate .msi setup file. Acronis Universal Restore can only be installed on a computer where at least one of the following Acronis components is installed:...
Page 23: Using Acronis Universal Restore In Virtual Environment
3.7.4 Benefits 1. Acronis Universal Restore can be used “after the fact”: it is not necessary to create an image with the option, you can restore any image to different hardware. 2. Acronis Universal Restore allows the user to exactly specify drivers during restore, enabling their maximum compatibility with the hardware.
Page 24: Using Dynamic Disks And Volumes
3.9 Backing up to tape drive Acronis True Image Enterprise Server supports SCSI tape drives. It can store backups on the tape and restore data from the tape, store large backups to multiple tapes, and append incremental/differential changes to a tape with the existing archives.
Page 25: Viewing Disk And Partition Information
(connection type, device type, size, etc.); partition information includes both physical (sectors, location, etc.), and logical (file system, free space, assigned letter, etc.) parameters. You can change the width of columns by dragging their borders with the mouse. Copyright © Acronis, Inc., 2000-2006...
Page 26: Chapter 4. Using Acronis True Image Management Console
Specify location). The default selection Registered Components will use setup files from the default C:\Program Files\Common Files\Acronis\RemoteInstall folder. 3. Select the Acronis component and specify the component features you want to install (for Installing Acronis True Image Enterprise Server...
Page 27: Managing A Single Remote Computer
4. Specify network name or IP address of the machine on which Acronis component is to be installed. You can also select the machine from the list of available using Browse… button. At that point you will have to provide administrator username and password.
Page 28: Backup And Recovery Tasks
Main window of Acronis True Image Management Console when connected to a remote computer The task list content depends on the programs installed on the connected computer. The most populated list will include managing Backup and Recovery Tasks (via Acronis True Image Agent), Group Server Management (via Acronis True Image Group Server) and Backup Server Management (via Acronis Backup Server).
Page 29: Managing Groups Of Computers
4.4 Managing groups of computers 4.4.1 Group server management When connected to a remote computer where Acronis True Image Group Server is installed, click Acronis True Image Group Server management to display the following window. Copyright © Acronis, Inc., 2000-2006...
Page 30 Here you can monitor states of Acronis True Image Enterprise Server tasks (backup, restore, validating backup archives) on all networked computers: Ready – the remote computer is available for the next task Prepare - preparations are being made on a remote machine for the task execution (analyzing partitions, preparing backup scripts, etc.)
Page 31: Creating New Group Backup Tasks
Select disk/partitions to backup 4. Specify a path to backup archive. To place every archive on its local computer, input Local path or select Acronis Secure Zone, if there is such zone on every remote 3.3 Acronis Secure Zone computer. For more information about Acronis Secure Zone see .
Page 32 You should also provide the archive name for each computer, unless the archives are targeted to Acronis Secure Zones or a backup server. Pressing the button to the right of name input field will assign to each archive the respective computer’s name.
Page 33: Group Tasks Management
Before you start managing the backup server, be sure to read section Server stating the basic operating principles of this component. When connected to a remote computer where Acronis Backup Server is installed, click Acronis Backup Server management to display the following window. Copyright © Acronis, Inc., 2000-2006...
Page 34: Default Settings
Maximum number of backups in an archive means maximum number of incremental backups plus one initial full backup. For example, if this parameter is set to 5, Acronis Backup Server will create one full backup, then four incremental backups, then again a full backup and so on.
Page 35: Set Up Administrator Profiles
Unlimited values for quotas/time limits. 4.5.2 Set up Administrator profiles To be able to remotely back up data from a networked computer where Acronis True Image Agent is installed, to backup server, add this computer to Acronis Backup Server database.
Page 36: Adding Users And Administrators To Acronis Backup Server Database
By default, this user is able to manage the backup server and perform backups on base of computer profiles, i.e. has administrator’s rights on the backup server. To enable any user to back up data from any networked computer, where Acronis True Image Enterprise Server local version is installed, to backup server, an administrator should add this user to Acronis Backup Server database.
Page 37: Changing User Profiles
If you select a user and click Clear, all archives created by this user will be deleted. The same operation for administrator profiles is impossible. Copyright © Acronis, Inc., 2000-2006...
Page 38: Configuring Backup Locations
After clicking on Delete item the dialog box comes up, allowing you to view a list of backup archives to be removed and a list of associated users/computers before you confirm the operation. Copyright © Acronis, Inc., 2000-2006...
Page 39: Managing Archives
Bootable removable media or RIS package provides the ability to boot the standalone version of Acronis True Image Enterprise Server or Acronis True Image Bootable Agent on a crashed computer; computer, running other than Windows operating system or bare metal.
Page 40 Acronis True Image Management Console does not contain Rescue Media Builder in its own installation. Therefore, to be able to create bootable media/RIS package from Acronis True Image Management Console, you must have Acronis True Image Enterprise Server or another Acronis product including Rescue Media Builder, installed on the same computer.
Page 41: Chapter 5. Using Acronis True Image Enterprise Server (Local Version)
Chapter 5. Using Acronis True Image Enterprise Server (local version) Acronis True Image Enterprise Server supports the command-line mode for data backup and restore, as well as the GUI mode, and can be used to execute XML scripts. Here we describe the operations available in GUI mode, which provides more functionality.
Page 42 • Options – opens a window for editing default backup/restore options, setting text appearance (fonts), configuring email/Winpopup notifications etc. The Help menu is used to invoke help and obtain information about Acronis True Image Enterprise Server. Active Tasks pane The Active Tasks pane displays the scheduled and currently-being-executed tasks. It features its own toolbar.
Page 43: Managing A Local Computer
Click the very right button on a tasks pane toolbar at the bottom of the window. See details 11.3 Viewing logs • Manage Acronis Secure Zone Click Manage Acronis Secure Zone, then follow the Wizard’s instructions. See details in Chapter 9. Managing Acronis Secure Zone • Activate Acronis Startup Recovery Manager Click Activate Acronis Startup Recovery Manager, then follow the Wizard’s instructions.
Page 44 Chapter 10. Creating bootable media Some of the above operations can be executed in command-line as well. For more 15.1 Working information on Acronis True Image Enterprise Server command-line mode see in the command-line mode Copyright © Acronis, Inc., 2000-2006...
Page 45: Chapter 6. Creating Backup Archives
You also may not be able to boot the restored operating system. Therefore, it is recommended that you select only files and folders containing user data. To back up a disk or partition, use image backup. 5. Click Next. Copyright © Acronis, Inc., 2000-2006...
Page 46 If you are going to create a differential backup, select the full backup which will be a base, or any of existing differential archives. Either way, the program will create a new differential archive file. Copyright © Acronis, Inc., 2000-2006...
Page 47 For example, saving the archive to another hard disk will protect your data if the primary disk is damaged. Data saved to a network disk, ftp-server or removable media will survive even if all your local hard disks are down. You can also use Acronis Secure Zone 3.3 Acronis Secure Zone (see details in ) for storing backups.
Page 48 Back to make changes in the created task. Clicking Proceed will launch the task execution. 17. (For Acronis True Image Enterprise Server local version and Acronis True Image Management Console, connected to the computer being backed up) The task will appear on the Active tasks pane of the main window.
Page 49: Backing Up Disks And Partitions (Image Backup)
In Acronis True Image Enterprise Server local version you can adjust the backup process priority. To do so, click on the process icon in the System Tray and select Low, Normal, or 6.3.6 Backup High priority from the appearing menu. How to set the default priority, see in performance 18.
Page 50 For example, saving the archive to another hard disk will protect your data if your primary disk is damaged. Data saved to a network disk, ftp-server or removable media will survive even if all your local hard disks are down. You can also use Acronis Secure Zone 3.3 Acronis Secure Zone (see details in ) for storing backups.
Page 51: Setting Backup Options
If you prepare some more backup operations, they will be queued after the current. In Acronis True Image Enterprise Server local version you can adjust the backup process priority. To do so, click on the process icon in the System Tray and select Low, Normal, or 6.3.6 Backup...
Page 52: Archive Protection
If you try to restore data from a password-protected archive, or append an incremental/differential backup to such an archive, Acronis True Image Enterprise Server will ask for the password in a special window, allowing access only to authorized users.
Page 53: Database Support
It is critical to note that these commands, as opposed to Pre/post commands above, will data cap ure be executed before and after process, which takes seconds, while the entire backup procedure may take quite long time. Therefore, the database idle time will be minimal. Copyright © Acronis, Inc., 2000-2006...
Page 54: Compression Level
You can limit the hard disk usage by Acronis True Image Enterprise Server to a desired level. To set the desired HDD writing speed for data being backed up, drag the slider or enter the writing speed in kilobytes per second.
Page 55: Fast Incremental/Differential Backup
If you frequently backup data to network drives, think of limiting the network usage used by Acronis True Image Enterprise Server. To set the desired data transfer speed, drag the slider or enter the bandwidth limit for transferring backup data in kilobytes per second.
Page 56: File-Level Security Settings
Choose the basic components, necessary for boot and restoring data, on the General tab. The Acronis One-Click Restore is a minimal addition to your rescue media, allowing one- click data recovery from an image archive, stored on this media. This means that at boot from the media and clicking “restore”...
Page 57: Additional Settings
Restore Data Wizard, use Acronis Snap Restore or Acronis Universal Restore etc. Under Advanced tab you can select full, safe or both Acronis True Image Enterprise Server loader version. The safe version does not have USB, PC card or SCSI drivers and is useful only in case the full version does not load.
Page 58: Chapter 7. Restoring The Backup Data
The boot CD from which you loaded the program does not keep you from using other CDs with backups. Acronis True Image Enterprise Server is loaded entirely into RAM, so you can remove the bootable CD to insert the archive disk.
Page 59 2. Click Next. 3. Select the archive. If the archive is located in Acronis Secure Zone, select it to choose the archive on the next step. If the archive is located on removable media, e.g. CD, first insert the last CD and then insert disks in reverse order when Restore Data Wizard prompts.
Page 60 Set the options manually. If the latter is the case, the settings will be applied only to the current restore task. Alternatively, you can edit the default options from the current 7.4 Setting restore options screen. Then your settings will be saved as default. See for more information. Copyright © Acronis, Inc., 2000-2006...
Page 61 Back to make changes in the created task. Clicking Proceed will launch the task execution. 17. (For Acronis True Image Enterprise Server local or standalone version, or Acronis True Image Management Console, connected to the target computer) The task will appear on the Active tasks pane of the main window.
Page 62: Restoring Disks/Partitions Or Files From Images
2. Click Next. 7.3.2 Archive selection 1. Select the archive. If the archive is located in Acronis Secure Zone, select it to choose the archive at the next step. If the archive is located on removable media, e.g. CD, first insert the last CD and then insert disks in reverse order when Restore Data Wizard prompts.
Page 63: Restoration Type Selection
Therefore, if your system disk consists of several partitions and you are planning to use Acronis Snap Restore, all partitions must be included into the image. Otherwise partitions, missing in the image, will be lost.
Page 64: Selecting A Disk/Partition To Restore
However, you can choose an ordinary way of restoration for that image. This will allow you to make changes to the restored partition, that would be impossible when using Acronis Snap Restore. Finally, if you are not going to recover the system, but only want to repair damaged files, select Restore specified files or folders.
Page 65: Changing The Restored Partition File System
1. Though seldom required, you can change the partition file system during its restoration. Acronis True Image Enterprise Server can make the following file system conversions: FAT 16 -> FAT 32, Ext2 -> Ext3. For partitions with other native file systems this option is not available.
Page 66: Assigning A Letter To The Restored Partition
7.3.9 Assigning a letter to the restored partition 1. Acronis True Image Enterprise Server will assign an unused letter to a restored partition. You can select the desired letter from a drop-down list. If you set the switch to No, no letters will be assigned to the restored partition, hiding it from OS.
Page 67: Using Acronis Universal Restore
Acronis True Image Enterprise Server installations including Acronis Universal Restore. Acronis Universal Restore option is not available when restoring dynamic disks and volumes. 1. Using Acronis Universal Restore will help you create a bootable system clone on a 3.7 Acronis Universal Restore different hardware (for more information see ).
Page 68: Restoration Summary And Executing Restoration
Windows itself when it boots. Thus, Acronis Universal Restore uses three sources for drivers search: the driver repository, the list of user-specified (enforced) drivers, and the Windows default driver storage folders (in the image being restored).
Page 69: Setting Restore Options
If Acronis Universal Restore finds no HAL or hard disk controller drivers compatible with the new hardware in all available sources, you will be prompted to browse network share drive, floppy disk or CD to select missing drivers. On starting Windows, it will initialize a common procedure for installing new hardware.
Page 70: Pre/Post Commands
1. You can choose whether to restore files’ date and time from the archive or assign the files the current date and time. 2. Before data is restored from the archive, Acronis True Image Enterprise Server can check its integrity. If you suspect that the archive might have been corrupted, select Validate backup archive before restoration.
Page 72: Chapter 8. Scheduling Tasks
Chapter 8. Scheduling tasks Acronis True Image Enterprise Server allows you to schedule periodic backup tasks. Doing so will give you peace of mind, knowing that your data are safe. You can create more than one independently scheduled task. For example, you can back up your current project daily and back up the application disk once a week.
Page 73: Setting Up Daily Execution
If you select the daily execution, set the Start time and days on which you want to execute the task: • Every day • Weekdays • Every х days – once in several days (specify the interval). Copyright © Acronis, Inc., 2000-2006...
Page 74: Setting Up Weekly Execution
If the computer is off when the scheduled time comes, the task won’t be performed, but you can force the missed task to launch at the next system startup by checking a box under the Start time fields. Copyright © Acronis, Inc., 2000-2006...
Page 75: Setting Up Monthly Execution
Start time fields. 8.1.4 Setting up one-time execution If you select the one-time execution, set the Start time and date on which to execute the task: Copyright © Acronis, Inc., 2000-2006...
Page 76: Managing Scheduled Tasks
To delete a task with confirmation, select it and click Delete the Selected Task on the Active tasks toolbar. To rename a task, select it, click Rename the Selected Task on the Active tasks toolbar, enter the new task name and press Enter. Copyright © Acronis, Inc., 2000-2006...
Page 77: Chapter 9. Managing Acronis Secure Zone
1. Before creating the Acronis Secure Zone, you can estimate its size. To do this, start backup and select all data you are going to backup into the Acronis Secure Zone. At the Set Backup Options step choose Set the options manually, then set compression level. You will see the estimated full backup size.
Page 78: Resizing Acronis Secure Zone
The opposite situation might arise if either partition lacks free space. 3. Select partitions from which free space will be used to increase Acronis Secure Zone or that will receive free space after the zone is reduced.
Page 79 Zone deletion might take several minutes or more. Please wait until the whole procedure is finished. Acronis Secure Zone deletion will automatically disable Acronis Startup Recovery Manager if it is activated and destroy all backups stored in the zone. Copyright © Acronis, Inc., 2000-2006...
Page 80: Chapter 10. Creating Bootable Media
Chapter 10. Creating bootable media You can run Acronis True Image Enterprise Server on a bare metal or on a crashed computer that cannot boot. You can also back up disks on a non-Windows computer, copying all its data sector-by-sector into the backup archive. To do so, you will need bootable media with the standalone Acronis True Image Enterprise Server version.
Page 81 When using 3.5” diskettes, you will be able to write on a diskette (or a set of the diskettes) only one component at a time (for example, Acronis True Image Enterprise Server). To write another component, start Bootable Media Builder once again.
Page 82 5. Next, the program will calculate how many blank disks are required (in case you have not chosen ISO or RIS) and give you time to prepare them. When you are finished, click Proceed. After you create a boot disk, identify it and keep it in a safe place. Copyright © Acronis, Inc., 2000-2006...
Page 83: Chapter 11. Other Operations
Tools group or click Validate Backup Archive on the toolbar. 2. Click Next. 3. Select the archive to validate. If the archive is located in Acronis Secure Zone, select it to choose the archive on the next step.
Page 84: Email Notification
- when the operation failed (check Add full log to the notification to add the full operation log to the message) - during the operation when user interaction is required. 11.2.2 WinPopup notification To set up WinPopup notification, select Tools -> Options -> Notifications -> WinPopup: Copyright © Acronis, Inc., 2000-2006...
Page 85: Viewing Logs
- during the operation when user interaction is required. 11.3 Viewing logs Acronis True Image Enterprise Server allows users to view its working logs. They can provide information about scheduled tasks results, including reasons for failure, if any. To invoke the log window, select Show log on the toolbar or from the Tools menu.
Page 86: Event Tracing
11.4 Event tracing 11.4.1 Windows event log You can choose whether to store event log messages, issued by Acronis True Image Enterprise Server, to Windows Event Log (to see this log, run eventvwr.exe or select Control Panel -> Administrative tools -> Event Viewer -> Application).
Page 87 If you turn off System Restore on any disk or partition, all previously created restore points for that disk (partition) will be deleted. Please make sure you do not need those restore points before proceeding. Copyright © Acronis, Inc., 2000-2006...
Page 88: Chapter 12. Mounting An Image As A Virtual Drive
1. Invoke the Mount Image Wizard by clicking on the Mount Image operation icon in the main program window. 2. Click Next. 3. Select the archive from the drives tree. If the archive is located in Acronis Secure Zone, select it to choose the archive at the next step. Copyright © Acronis, Inc., 2000-2006...
Page 89 If you added a comment to the archive, it will be displayed to the right of the drives tree. If the archive was protected with a password, Acronis True Image Enterprise Server will ask for it. Neither the partitions layout, nor the Next button will be enabled until you enter the correct password.
Page 90: Unmounting An Image
To disconnect the virtual disk, click Unmount Image and select the disk to unmount. You can also unmount the disk in Windows Explorer by right-clicking on its icon and selecting Unmount. Copyright © Acronis, Inc., 2000-2006...
Page 91: Chapter 13. Transferring The System To A New Disk
In this case, you have to transfer the system to a higher-capacity hard disk. This feature is available in Acronis True Image Enterprise Server local version only. Transferring systems using Acronis True Image Management Console is impossible.
Page 93: Selecting Destination Disk
After you select the source disk, you have to select the destination where the disk information will be copied. The previously selected source becomes grayed-out and disabled for selection. If either disk is unpartitioned, the program will automatically recognize it as the destination and bypass this step. Copyright © Acronis, Inc., 2000-2006...
Page 94: Partitioned Destination Disk
If you selected the manual mode, the program will ask you what to do with the old disk: • Create a new partition layout – All existing partitions and their data will be deleted (but they will also be cloned to the new disk, so you won’t lose them) Copyright © Acronis, Inc., 2000-2006...
Page 95: Destroying The Old Disk Data
13.3.7 Destroying the old disk data If you elected to destroy the old disk data in the previous step, you will have to select the destruction method now: • Quick – quick one-pass destruction • Normal – multipass destruction Copyright © Acronis, Inc., 2000-2006...
Page 96: Selecting Partition Transfer Method
The second method takes more time, but makes it impossible to recover data afterwards, even with special equipment. The first method is less secure, but is still suitable for most cases. 13.3.8 Selecting partition transfer method Acronis True Image Enterprise Server will offer you the following data transfer methods: • As is •...
Page 97: Partitioning The Old Disk
Further, you will be able to use the unallocated space to create new partitions or to enlarge the existing partitions with special tools, such as Acronis Disk Director Suite. As a rule, "as is" transfers are inexpedient, as they leave much unallocated space on the new disk.
Page 98: Cloning Summary
Cloning a non-system disk or a disk containing an operating system, but not active one at the moment, will proceed without reboot. After you click Proceed, Acronis True Image Enterprise Server will start cloning the old disk to the new disk, indicating the progress in the special window.
Page 99 Having provided the new location and size, click Next. You will be taken two steps back to the partition layout. You might have to perform some more resizing and relocation before you get the layout you need. Copyright © Acronis, Inc., 2000-2006...
Page 100: Chapter 14. Adding A New Hard Disk
This feature is available in Acronis True Image Enterprise Server local version only. Adding disks using Acronis True Image Management Console is impossible.
Page 101: Disk Add Summary
The disk add summary contains a list of operations to be performed on disks. After you click Proceed, Acronis True Image Enterprise Server will start creating and formatting new partitions, indicating the progress in the special window. You can stop this procedure by clicking Cancel.
Page 102: Chapter 15. Command-Line Mode And Scripting
An administrator might need a console interface in some situations. Acronis True Image Enterprise Server supports this mode with TrueImageCmd.exe utility. The file is located in a folder where Acronis True Image Enterprise Server has been installed, by default it is C:\Program Files\Acronis\TrueImageEnterprise.
Page 103 Specifies the partition where the image file is stored (by letter or number). This option is used with /filename:file_name. In this case the file name must be specified without drive letter or root folder. For example: /file_partition:D /filename:"\1.tib” Copyright © Acronis, Inc., 2000-2006...
Page 104 Lists the image file contents. /password:[password] Specifies the password for the image file (if required). 4. clone Clones a hard disk. Options /harddisk:[disk number] Specifies a source hard disk which will be cloned to the new hard disk. Copyright © Acronis, Inc., 2000-2006...
Page 105 Specifies the virtual disk to be disconnected by letter. /letter:all Disconnects all virtual drives. 7. asz_create Creates Acronis Secure Zone on the selected drive. Options /harddisk:X Specifies the hard disk number where the Acronis Secure Zone will be created. /partition:[partitions list] Copyright © Acronis, Inc., 2000-2006...
Page 106 Specifies partitions from which free space will be taken for Acronis Secure Zone creation. /size:[ASZ size in sectors] Sets the Acronis Secure Zone size (in sectors). If this size is not specified, it will be set as average between maximal and minimal values, including unallocated spaces on the all listed partitions.
Page 107: Trueimagecmd.exe Usage Examples
3 from 0 to 64000 sector. trueimagecmd /deploy /filename:z:\Server30Cdrive.tib /partition:1-1 /target_partition:2-1 /type:active /password:123qwe • This will restore partition 1-1, stored in image Server30Cdrive.tib, protected with password ‘123qwe’, to partition 2-1. The restored partition will be of active type. Copyright © Acronis, Inc., 2000-2006...
Page 108: Command-Line Mode Usage Under Dos
This will connect all images, stored in file mybackup.tib on the network drive, as virtual drives. 15.1.3 Command-line mode usage under DOS For use in the MS-DOS compatible environments Acronis True Image Enterprise Server includes the TrueImageCmdDos.exe utility. It is located in a folder where Acronis True Image Enterprise Server...
Page 109: Script Structure
Password protection will also be added. The entire script must be located between <backup> <backup/> tags. <? xml version="1.0" encoding="utf-8" ?> <backup> <source letter ="c" /> <source letter ="f" /> <target file="e:\mybackup2.tib" /> <options compression="high" incremental="true" description="this is my backup" split="650 Mb" password="" /> Copyright © Acronis, Inc., 2000-2006...
Page 110 The script for backing up to tape (tapeN specifies the tapes numbers): <? xml version="1.0" encoding="utf-8" ?> <backup> <source letter =”c” /> <source letter ="f" /> <target cdrw="\taperecorder\\\.\tape0|||” /> <target cdrw="\taperecorder\\\.\tape1|||” /> <options compression="high" incremental="true" description="this is my backup" /> </backup> Copyright © Acronis, Inc., 2000-2006...

ACRONIS TRUE IMAGE 9.1 - ENTERPRISE SERVER User Manual

Chapter 1. Introduction

Chapter 2. Acronis True Image Enterprise Server Installation and Starting

Chapter 3. General Information and Proprietary Acronis Technologies

Chapter 4. Using Acronis True Image Management Console

Chapter 5. Using Acronis True Image Enterprise Server (Local Version)

Chapter 6. Creating Backup Archives

Chapter 7. Restoring the Backup Data

Chapter 8. Scheduling Tasks

Chapter 9. Managing Acronis Secure Zone

Chapter 10. Creating Bootable Media

Chapter 11. Other Operations

Chapter 12. Mounting an Image as a Virtual Drive

Chapter 13. Transferring the System to a New Disk

Chapter 14. Adding a New Hard Disk

Chapter 15. Command-Line Mode and Scripting

Quick Links

Related Manuals for ACRONIS TRUE IMAGE 9.1 - ENTERPRISE SERVER

Summary of Contents for ACRONIS TRUE IMAGE 9.1 - ENTERPRISE SERVER

Table of Contents