Installation; System Requirements; Used Ports And Ip Addresses - ACRONIS SNAP DEPLOY 3 - FOR WORKSTATION Manual

3.1 System requirements

The Acronis Snap Deploy components can be installed on computers running the following operating
systems:
MS Windows Server 2008 (TBD)
MS Windows Server 2003 Service Pack 2 (x86, x64)
MS Windows Server 2003 R2 (x86, x64)
MS Windows Small Business Server 2003
MS Windows Storage Server 2003 R2
MS Windows Server 2003 x64 Editions
MS Windows 2000 Server
MS Windows 2000 Advanced Server
MS Windows 2000 Professional SP4
MS Windows Vista Home Basic (x86, x64)
MS Windows Vista Home Premium (x86, x64)
MS Windows Vista Business (x86, x64)
MS Windows Vista Ultimate (x86, x64)
MS Windows XP Home
MS Windows XP Professional
MS Windows XP Professional x64 Edition
MS Windows XP Professional SP2
* - S – server license, WS – workstation license.

3.2 Used ports and IP addresses

The Acronis OS Deploy Server and the Acronis Snap Deploy Management Console use the following
ports and IP addresses for remote operation:
- UDP port: 9876
- TCP port: 9876, if busy, choose a port at random
- IPv4 multicast address: 239.255.219.45
- Acronis Snap Deploy Management Console UDP port: 9877, if busy, choose a port at random
The Acronis PXE Server uses the following ports and IP addresses:
- UDP port: 67, 68, 69.
- Broadcast address: 255.255.255.255
For a remote installation, the TCP port 25001 is used.
If you are using a firewall, you might have to set the appropriate access options.
© Acronis, Inc

3. Installation

The type of license required for the
Acronis Snap Deploy Management
Agent installation
S
S
S
S
S
S
S
S
WS
WS
WS
WS
WS
WS
WS
WS
WS
23