Command-Line Mode Usage Under Dos; Scripting; Script Execution Parameters - ACRONIS TRUE IMAGE SERVER 8.0 User Manual

Command-line mode and scripting
4. Clone
ti_cons /clone /harddisk:2 /target_harddisk:3
• Clone hard disk 2 to hard disk 3.
5. Delete partition
ti_cons /delete_partition /partition:2-1,2-2 /reboot
/log:deleting.txt
• This will delete partitions 2-1 and 2-2, create log file 'deleting.txt' and reboot the
server, when the operation is completed.
6. Explore image
ti_cons /explore /filename:\\myserver\backup\mybackup.tib
/net_user:john /net_password:qwerty
• This will connect all images, stored in file mybackup.tib on the network drive, as
virtual drives.
10.1.3

Command-line mode usage under DOS

For usage in the MS-DOS compatible environments Acronis True Image Server 8.0
for Windows includes ti_dos.exe utility. It is located in a folder where Acronis True
Image Server 8.0 for Windows has been installed, by default it is C:\Program
Files\Acronis\TrueImage.
10.2

Scripting

10.2.1

Script execution parameters

Scripts are executed by the TrueImageTerminal.exe utility located in the Acronis
True Image Server installation folder (i.e. C:\Program Files\Acronis\TrueImage).
This utility is also used to monitor backup progress.
TrueImageTerminal execution parameters:
TrueImageTerminal.exe [arguments]
Arguments include the following:
/help – outputs help information about TrueImageTerminal.exe parameters.
/progress – outputs progress of backup operations run either from Acronis True
Image Server graphics user interface, or from the script.
/execute: [
executed, they are queued. An example for executing MyBackup.tis script:
TrueImageTerminal.exe/execute:C:\MyBackup.tis
70
script file name
] – executes a script. If there are several scripts to be
Copyright © Acronis, Inc., 2000-2005