ACRONIS SNAP DEPLOY 3 - FOR WORKSTATION Manual page 93

/differential
/compression:[0...9]
/split:[size in MB]
General options
/oss_numbers
/reboot
/log:[file name]
/log_net_user:[remote user]
/log_net_password:[password]
15.3.3 Specific options (options specific for individual asdcmd
commands)
Option
create
/harddisk:[disk number]
© Acronis, Inc
Set the image type to differential. If not
specified or there is no basic full image,
a full image will be created
Specify the data compression level. It
ranges from 0 to 9 and is set to 3 by
default
Split the image into parts of the
specified size
Declares that numbers of partitions in
the /partition option are adjusted
for the MBR partition table, rather than
just as ascending numbers. This means
that primary partitions have numbers 1-
1, 1-2, 1-3, 1-4; logical partitions
numbers start with 1-5. For example, if
the disk has one primary and two
logical partitions, their numbers can
appear as follows:
/partition:1-1,1-2,1-3 or
/oss_numbers /partition:1-
1,1-5,1-6
Reboot the
operation is completed
Create a log file of the current operation
with the specified file name
If the log file is created on a network
share, include the user name for logon
to the share
If the log file is created on a network
share, include the password for logon to
the share
Description
Specifies the hard disks to include into the image file. The list of
available hard disks is provided by the /list command. An image
may contain data of more than one hard disk. In that case,
separate disk numbers by commas, e.g.:
/harddisk:1,3
computer after the
Any
Any
Any
Any
Any
Any
Any
93