Manual Deployment; Booting Up The Targets - ACRONIS SNAP DEPLOY 3 - FOR WORKSTATION Manual

Manual deployment presumes that you first boot up the target computers and then apply the
deployment template. The deployment will start immediately on clicking Proceed in the deployment
wizard.

11.1 Booting up the targets

To perform manual or event-driven deployment you need to boot the target computers into Acronis
Snap Deploy Agent using either bootable media or Acronis PXE Server.
Deployment presumes that you have created a master image, so at least the Acronis Snap Deploy
Management Console is installed.
1. Install Acronis License Server. Import licenses to the license server. Install Acronis OS Deploy
Server.
2. Do one of the following:
Create bootable media with Acronis Snap Deploy Agent
or
Install Acronis PXE Server, connect the console to the PXE server and upload Acronis Snap Deploy
Agent
3. Do one of the following:
Boot the target computer(s) into Acronis Snap Deploy Agent from bootable media
or
Boot the target computer(s) into Acronis Snap Deploy Agent from the PXE Server.
4. Select Acronis Snap Deploy Agent in the boot menu.
© Acronis, Inc

11. Manual deployment

The boot menu on the target side
69