Chapter 6 Repair And Replacement; Field Replaceable Units; Replacing The Power Supply - Dell PowerVault 50F Installation And Troubleshooting Manual

Dell powervault 51f 8-port fibre channel switch installation and troubleshooting guide
Hide thumbs Also See for PowerVault 50F:
Table of Contents

Advertisement

support.dell.com
C H A P T E R 6
Repair and Replacement
This chapter covers the recommended and supported field repair and replacement for
the PowerVault 51F switch.

Field Replaceable Units

For information regarding the following field replaceable units (FRU), see the following
sections in this chapter:
Power Supply — "Replacing the Power Supply"
Gigabyte Interconnect (GBIC) module — "Replacing a GBIC Module"
Fan Tray Assembly — "Replacing the Fan Assembly"
System board — "Replacing the System Board"
Chassis Assembly — "Replacing the Chassis"

Replacing the Power Supply

There are no user serviceable parts inside the power supply chassis.
WARNING: The power supplies in your computer or storage system may
produce high voltages and energy hazards, which can cause bodily harm.
Only trained service technicians are authorized to remove the computer
covers and access any of the components inside the computer. This warning
applies to Dell PowerEdge 4xxx or higher servers and Dell PowerVault 2xxS
storage systems.
WARNING: This system may have more than one power supply cable. To
reduce the risk of electrical shock, a trained service technician must discon-
nect all power supply cables before servicing the system.
Repair and Replacement
6-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powervault 51fPowervault 56f

Table of Contents