Table 4-8. System Services - Dell PowerVault 50F Installation And Troubleshooting Manual

support.dell.com
Table 4-8 describes the system services.

Table 4-8. System Services

Field Description
rusersd Dynamically enables or disables a server that
returns information via remote procedure calls
(RPC) about the user logged into the system. The
information returned includes: the user login name,
the system name, the login protocol or type, login
time, idle time, and remote login location (if
applicable).
The retrieval of this information is supported by a
number of operating systems which support RPC.
On most UNIX-based systems (HP-UX, Irix, Linux,
Solaris, and so on), the command to retrieve the
information is rusers. Please see your local system
documentation for the appropriate usage of the
rusers or equivalent command.
rstatd Dynamically enables or disables a server that
returns information via RPC about system opera-
tion information. The protocol provides for a wide
range of system statistics; however, only the
Ethernet interface statistics and system up time
are supported.
The retrieval of this information is supported by a
number of operating systems which support RPC.
On most UNIX-based systems (HP-UX, Irix, Linux,
Solaris, and so on) the commands to retrieve the
information are rup and rsysinfo. Please see your
local system documentation for the appropriate
usage of the rup, rsysinfo, or equivalent
commands.
Default
Off
Off
PowerVault 51F Commands 4-13