Agtcfgdefault - Dell PowerVault 50F Installation And Troubleshooting Manual

4-2 Dell PowerVault 51F 8-Port Fibre Channel Switch Installation and Troubleshooting Guide
Table 4-1. Command Line Editing Commands (continued)
Command Description
Move one space left
h
Move one space right
l
Replace text
R
Delete one character
x
Undo last change
u
Enter command mode
<esc>
Back up
<Backspace>
or
<Ctrl><h>
Erase all current text and begin again
<Ctrl><u>

agtcfgDefault

This agtcfgDefault command allows admin to reset the configuration of the Simple
Network Management Protocol (SNMP) agent to factory defaults, as shown in the fol-
lowing example:
switch:admin> agtcfgDefault
Committing configuration...done.
agent configuration reset to factory default
sw5:admin> agtcfgShow
Current SNMP Agent Configuration
Customizable MIB-II system variables:
sysDescr = Fibre Channel Switch.
sysLocation = End User Premise
sysContact = Field Support.
swEventTrapLevel = 0
authTraps = 0 (OFF)
SNMPv1 community and trap recipient configuration:
Community 1: Secret C0de (rw)
No trap recipient configured yet
Community 2: OrigEquipMfr (rw)
No trap recipient configured yet
Community 3: private (rw)
No trap recipient configured yet