Usb Lan Adapter Replacement - HP StorageWorks 12000 User Manual
Hp storageworks 12000 gateway virtual library system user guide (ah814-96015, september 2010)
Hide thumbs
Also See for StorageWorks 12000:
- User manual (266 pages) ,
- Manual (218 pages) ,
- Design manual (160 pages)
Table of Contents
Advertisement
7.
Power on the new switch.
USB LAN Adapter Replacement
To replace the USB LAN adapter:
1.
If you are replacing the USB LAN adapter (as opposed to simply re-inserting the existing one),
power off the node and switch to which the USB LAN adapter is attached. See
System.
2.
Disconnect the USB LAN adapter by unplugging the USB cable from the node and unplugging
the Ethernet cable from the adapter.
3.
Connect the new USB LAN adapter by connecting the USB cable to the node port from which
the previous cable was removed, and plugging the Ethernet cable into the USB LAN adapter.
4.
If you powered off the system, power on the system. See
208
Component Replacement
Powering Off the
Powering on the VLS12000
System.
Advertisement
Table of Contents
