Restoring From A Lan/Wan Virtual Cartridge; Loading Blank Media Into An Echo Copy Pool - HP StorageWorks 12000 User Manual
Hp storageworks 12000 gateway virtual library system user guide (ah814-96015, september 2010)
Hide thumbs
Also See for StorageWorks 12000:
- User manual (266 pages) ,
- Manual (218 pages) ,
- Design manual (160 pages)
Table of Contents
Advertisement
8.
Hover over the first Select Slot link to display a list of the available destination slots. Select a slot
number from the list.
After you select a slot from the available destination slots, that slot no longer appears in the list.
9.
Hover over each Select Slot link until you have selected a destination slot for each mailslot.
10.
Click Next Step. A confirmation screen displays.
11.
Click Load.
The Media Move History screen displays the current status of the move. The possible status
messages are Moving, Waiting, Successful, and Failed.
If the status of the move is still Waiting, you can click Cancel to stop the move.
NOTE:
Using Load Media for Restore will create a virtual tape if one does not already exist.
Restoring from a LAN/WAN Virtual Cartridge
From Command View VLS:
1.
Click the Automigration/Replication tab.
2.
Under Destination Libraries in the navigation tree, expand the library you want to restore.
3.
From the navigation tree, select Slots.
4.
On the task bar, select Restore Media.
5.
Select the slot numbers you wish to restore.
NOTE:
Firmware version 2.x only allows you to restore one slot at a time.
6.
Click Submit.
The Restore Media screen refreshes with a message that indicates the restores were successful.
Loading Blank Media into an Echo Copy Pool
To move a blank tape (or a tape that should be considered blank) from a mailslot on a destination
library into an echo copy pool, use Load Blank Media. From Command View VLS:
1.
Select the Automigration/Replication tab.
2.
In the navigation tree, expand Destination Libraries and then the library of interest.
3.
Select Mailslot to display the list of mailslots on that library.
4.
From the task bar, select Load Blank Media to open the Load Blank Media screen.
5.
From the drop-down box, select the copy pool you want to load the media into. You can also
choose unmanaged slots that are not in a copy pool.
HP StorageWorks 12000 Gateway Virtual Library System User Guide
59
Advertisement
Table of Contents
