HP StorageWorks 12000 User Manual page 177

Command
addEmailServer
getEmailServer
deleteEmailServer
addEmail
getEmail
deleteEmail
addSnmpServer
HP StorageWorks 12000 Gateway Virtual Library System User Guide
1
Usage
Specifies an E-mail server with an SMTP gateway to route notification alerts from
the VLS. Where the options are:
-a <s> - E-mail server address (required)
-c <s> - node IP address (required)
-s <s> - Sender email address (optional)
-h - Displays command usage information (optional)
Returns the E-mail server configuration settings for notification alerts.
Deletes the specified E-mail server from the E-mail notification alerts settings. Where
the options are:
-a <s> - E-mail server address (required)
-c <s> - VLS node IP address (required)
-f - Force - This parameter is ignored and is present only for backward
compatibility (optional)
-h - Displays command usage information (optional)
Adds an E-mail address and desired report formatting to the E-mail notification
alert settings. Where the options are:
-a <s> - E-mail address (required)
-c <s> - VLS IP address (required)
-s <n> - Severity (1-Error, 2-Warning, 4-Info, or 8-Unknown) (optional)
-y <n> - E-mail type (1-Long with attachment, 2-Long, 4-Short, or 8-Reports)
(optional)
-h - Displays command usage information (optional)
-f <n> - Notification frequency (0-None, 1-Daily, 2-Weekly, 3-Bi-weekly, or
4-Monthly) (optional)
Returns the report settings for each E-mail address configured for notification alerts.
Deletes the specified E-mail address from the E-mail notification alert settings.
Where the options are:
-a <s> - E-mail address (required)
-c <s> - VLS node IP address (required)
-f - Force. This parameter is ignored and is present only for backward compatibility
(optional)
-y <n> - Email type (1-long with attachment, 2-long, 4-short, 8-reports,
16-configuration) (required)
-h - Displays command usage information (optional)
Specifies an SNMP management console to receive SNMP traps from the VLS.
Where the options are:
-a <s> - SNMP server IP address (required)
-c <s> - VLS node IP address (required)
-m <s> - Community (Public, ...) (required)
-v <s> - Trap version (required)
-s <n> - Severity (1-Error, 2-Warning, 4-Info, or 8-Unknown) (required)
-h - Displays command usage information (optional)
177