Front Panel Components
Item
Description
1
Console port
10/100/1000Base-T RJ-45 ports 1 through 20
2
(numbered from top to bottom, left to right)
3
10/100/1000 T dual-personality ports 21 through 24
4
10/100/1000 mini-GBIC dual-personality ports 21 through 24
Front Panel LEDs and Buttons
Item
Description
1
Clear button
2
Reset button
3
Locator LED
Status
When pressed with the Reset button in a specific pattern, any configuration
changes you may have made through the switch console, the Web browser
interface, and SNMP management are removed, and the factory default
configuration is restored to the switch.
Used to reset the switch while it is turned on. This action clears any temporary
error conditions that may have occurred and executes the switch self-test.
Blinking blue = Locate function is active. Firmware controlled, can be set to
on or blinking.
Off = Locate function is disabled.
HP StorageWorks 12000 Gateway Virtual Library System User Guide
191