Appendix A: Warning And Error Messages (Flash Professional Only); Flash Lite Emulator Error And Information Messages; Only) - MACROMEDIA FLASH 8-DEVELOPING FLASH LITE 2.X Develop Manual

APPENDIX A
Warning and Error Messages
(Flash Professional Only)
This appendix lists the possible information and warning messages that the Macromedia Flash
Lite emulator might generate while you're testing your Flash Lite application. For more
information about these warning messages, see
Professional only)" on page
Also see "Flash Lite error and warning messages (Flash Professional only)" on page
lists errors that can occur on both the emulator and an actual device.
Flash Lite emulator error and information
messages (Flash Professional only)
The following table lists all the information messages that the Flash Lite emulator reports:
Error code Message
FTPA002 FSCommand is ignored.
FTPA003 loadVariables is ignored.
"Setting emulator debug options (Flash
88.
Description
The emulator detected an
function call, which is not supported
by the selected test device. No
modifications are made to the device-
specific SWF file—this is just a
warning.
The emulator detected a
function call, which is
loadVariables()
not supported by the selected test
device and content type. No
modifications are made to the device-
specific SWF file—this is just a
warning.
A
92, which
fscommand()
107