Flash Lite Error And Warning Messages (Flash Professional Only) - MACROMEDIA FLASH 8-DEVELOPING FLASH LITE 2.X Develop Manual

Unsupported ActionScript commands
The Flash Lite emulator does not support the following
commands:
FullScreen
■
■ GetFreePlayerMemory
■ GetTotalPlayerMemory
Launch
■
■ Quit
■ StartVibrate
GetNetworkConnectStatus
■
■ GetNetworkRequestStatus
■ GetNetworkStatus
Flash Lite error and warning messages
(Flash Professional only)
The Flash Lite emulator generates two types of error messages while you test your content.
One type of message appears only in the emulator and is intended to provide information
about actual or potential errors; the other type of message occurs in both the emulator and on
an actual device.
The first type of error message provides useful debugging information about your SWF file.
For example, if your SWF file contains ActionScript that isn't supported by Flash Lite (or by
the version of Flash Lite available on the currently selected test device), the emulator generates
a warning message in the Output panel that alerts you, as the following image shows:
For a full list of debugging messages and their descriptions, see
information messages (Flash Professional only)" on page
92 Testing Flash Lite Content (Flash Professional Only)
and
fscommand() fscommand2()
"Flash Lite emulator error and
107.