Selecting Test Devices And Flash Lite Content Type; (Flash Professional Only); Selecting Test Devices And Flash Lite Content Type (Flash Professional Only) - MACROMEDIA FLASH 8-DEVELOPING FLASH LITE 2.X Develop Manual

Error Error string
number
6 Bad image data
7 Bad sound data
8 Root movie unloaded
9 N/A
10 getURL string too long
11 Not enough memory to
decompress image.
12 Bad SVG data
13 Stream loading out of
memory
Selecting test devices and Flash Lite
content type (Flash Professional only)
You use the Device Settings dialog box to select the test devices and content type for your
Flash Lite application. When you preview your application in the Flash Lite emulator, the
emulator is configured to match the behavior and appearance of the selected device and
content type. The Device Settings dialog box is available only when your Flash document is
configured to target a version of the Flash Lite player.
94 Testing Flash Lite Content (Flash Professional Only)
Description and possible causes
The SWF file contains an image that either Flash
Lite, or the platform's native image decoder, was
unable to decode.
The SWF file attempted to load a sound in an
unsupported format, or the sound data is
corrupted.
This error occurs when the root (level 0) SWF file
is replaced with another SWF file.
N/A
The URL string in the getURL call is too long.
Flash Lite does not have enough memory to
decode an image in the SWF file.
Flash Lite attempted to load SVG data that is
corrupted.
Flash Lite does not have enough memory
available to handle the data being streamed from
a URL. For example, this error can occur if you
attempt to load an XML file over the network
that's too large for Flash Lite to handle at one
time. If possible, try breaking the data file into
several smaller files and then load each file
individually.