Table of Contents
Advertisement
5.
Click Make Default to set the default device settings to the currently selected content type
and test devices.
Flash automatically applies the default device settings to any new document whose SWF
file's publish version is set to Flash Lite 1.0, 1.1, or 2.0.
6.
Click OK to close the Device Settings dialog box.
The devices and content types listed in the Device Settings dialog box are loaded from a local
XML database that is installed with Macromedia Flash Professional 8. As more devices that
support Flash Lite become available, you can download and install an updated list of devices
and content types from the Device Profile Updates page at
mobileupdate. You can also click the Check for New Devices link located at the bottom of the
Device Settings dialog box, as the following image shows:
Flash Lite content types (Flash
Professional only)
Flash Lite is installed on a variety of devices. Each installation supports one or more
application modes, or content types. For example, some devices use Flash Lite to enable screen
savers or animated ring tones. Other devices use Flash Lite to render Flash content that is
embedded in mobile web pages.
The following table lists and describes all of the Flash Lite content types available as of this
writing. For additional and up-to-date information about Flash Lite content-type availability,
see the Flash Enabled Mobile Device page at
supported_devices/.
As of this writing, Flash Lite 2.0 supports the Standalone Player content type only.
www.macromedia.com/go/
www.macromedia.com/mobile/
Flash Lite content types (Flash Professional only)
97
Advertisement
Table of Contents
