MACROMEDIA COLDFUSION 4.5-ADMINISTRING COLDFUSION SERVER Manual page 288

266
#cd <btinstall-dir>/program/
Set the default directory to the Programs Directory under Bright Tiger.
#<btinstall-dir>/program> hostinfo domain_name
The following sample output from the hostinfo utility provides information about a set
of round-robin DNS host names.
##<btinstall-dir>/program> hostinfo www.brighttiger.com
Information for host 'www.brighttiger.com':
FQHN: www.brighttiger.com
Primary Address: 0.0.0.0
Domain: .brighttiger.com
Aliases: btWeb1.brighttiger.com
btWeb2.brighttiger.com
www.brighttiger.com
Addresses: 444.87.27.76 444.87.27.77
The hostinfo utility displays the domain name, the primary IP address, and any IP
aliases. If the primary IP address is set to 0.0.0.0, the domain is using round-robin DNS.
The round robin names will appear under the Alias section of the DNS table and the
round-robin addresses appear under the Addresses section.
sniff utility
The sniff utility is a network management tool that displays the packets that a specific
Network Interface Card (NIC) is hearing.
To run the sniff utility, enter the following command-line syntax:
#/<btinstall-dir>/program/sniff
Below is sample output from the sniff utility:
Mail Test Environment Variables:
BTMailHost,
Packet Test Environment Variables:
BTPort,
BTMcastCount
BTSendInterval, BTDoLocalBind,
BTMcastAddress, BTLocalAddress, BTSendSize,
BTConsole,
Press keys at run-time:
d - dump sniff configuration information
H - display this and more help
h - display this help
l - run load balance test thread
m - run mail test thread
p - toggle packet dump display
q, <ESC>, <ENTER> - quit all active threads and exit
r - run UDP listener thread
s - run packet test thread
x - execute system command
BTSender, BTRecipients,
BTMcastTTL, BTUcastCount,
BTUcastAddress, BTBcastAddress
BTLogFile, BTSystem
Administering ColdFusion Server
BTSubject, BTText
BTBcastCount,
BTRecvSize