MACROMEDIA COLDFUSION 4.5-ADMINISTRING COLDFUSION SERVER Manual page 200

178
5. Choose the Specify an IP Address option.
6. Enter an IP address for the server in the IP Address field along with the
corresponding Subnet Mask and Default Gateway.
See your network administrator if you don't know this information.
7. Click OK.
8. Verify that you can access your server by its maintenance address using the
nslookup command from a command prompt.
For example:
nslookup wwwx.company.com
nslookup nnn.nnn.nnn.nnn
where
that server's IP address.
To learn how to put a server in maintenance mode, see "Putting a cluster member in
maintenance mode" on page 225.
Removing Web site IP addresses from the NIC
Prior to configuring the maintenance IP address, you may have previously bound the
IP addresses for your Web sites to the NIC. In order for the ClusterCATS offline
maintenance support to work as intended, you need to remove these Web sites' IP
addresses from the NIC.
is the explicit server name and
wwwx
Administering ColdFusion Server
represents the numeric values of
nnn