MACROMEDIA COLDFUSION 4.5-ADMINISTRING COLDFUSION SERVER Manual page 194

172
In order for ClusterCATS to perform dynamic addressing, your Web server must have a
specific network name and IP address configured for it. Additionally, it must reference
a valid local DNS server so that it can properly translate names to correct IP addresses.
This section describes the following Web server network configuration procedures:
Configuring your Web server to point to your local DNS server
Configuring ClusterCATS offline maintenance support (NT only)
Configuring your Web server to point to your local DNS server
You must configure each Web server in your cluster to reference your local DNS server
so that name to IP address mapping resolutions can occur.
To configure Windows NT Web servers to reference your DNS server:
1. Click Start>Settings>Control Panel.
2. Open the Network icon.
3. Click the Protocols tab and select the TCP/IP protocol from the list of Network
Protocols.
4. Click Properties.
The Microsoft TCP/IP Properties dialog box appears.
5. Click the DNS tab.
Administering ColdFusion Server