Configuring Cluster Administration Security - MACROMEDIA COLDFUSION 4.5-ADMINISTRING COLDFUSION SERVER Manual

218
3. Enter the name of the server through which outgoing e-mail will be sent in the
SMTP Gateway field.
4. Enter in the Support E-mail field the e-mail address of the person at your
organization that should receive a copy of the e-mail that is sent nightly to Allaire's
Technical Support.
If more than one person should receive the e-mail, separate the e-mail addresses
with commas.
5. Enter in the Report e-mail field the e-mail address of the person at your
organization that should receive daily reports about your clusters.
Again, if more than one person should receive the e-mail, separate the e-mail
addresses with commas.
6. Click OK.

Configuring cluster administration security

When you enable the ClusterCATS administration security for a specific cluster, only
authorized users are able to access and administer that cluster using their ClusterCATS
Explorer. ClusterCATS provides three administration security settings for securing your
server cluster environment:
Disabled Authentication
This is the default setting. It does not provide any security challenge, and
therefore anyone can access the server cluster with a ClusterCATS Explorer and
modify your cluster environment.
Local User Authentication
This is the recommended security setting for most clusters residing in small to
mid-sized organizations that have only one or few administrators. This setting
provides a security challenge for anyone accessing the server. The
authentication is based on administrative privileges that have been defined for
specific users on each server in the cluster.
Windows NT Domain Authentication (Windows NT Only)
Administering ColdFusion Server