MACROMEDIA COLDFUSION 4.5-ADMINISTRING COLDFUSION SERVER Manual page 195

Table of Contents

Advertisement

Chapter 6: Creating Scalable and Highly Available Web Sites
6.
Enter the name of the server that is hosting the Web application in the Host Name
field.
7.
Enter the domain name (yourcompany.com) in the Domain Name field.
8.
In the DNS Service Search Order area, click Add to enter the IP addresses of your
local DNS server(s).
You may have several local DNS servers if you have different subnets on your
network. If so, add each IP address individually by clicking the Add button for each
server.
9.
After adding the IP address(es), use the arrows on the right if applicable to specify
the order in which the DNS servers will be accessed.
10. Click OK in all open dialog boxes and close the Windows Control Panel.
To configure UNIX-based Web servers to reference your DNS server
See the UNIX operating system documentation that came with your server for specific
procedures about how to configure your Web server to reference your local DNS server.
Configuring ClusterCATS offline maintenance support (NT only)
Before attempting to configure the ClusterCATS offline maintenance support feature,
review the first two sections below thoroughly to understand what offline
maintenance support is and how static and dynamic IP addresses enable this
functionality. Then proceed with the configuration procedures.
173

Advertisement

Table of Contents
loading

This manual is also suitable for:

Coldfusion 4.5

Table of Contents