MACROMEDIA COLDFUSION 4.5-ADMINISTRING COLDFUSION SERVER Manual page 274

252
5. Enter in the Support E-mail field the e-mail address of the person at your
organization that should receive a copy of the e-mail that is sent nightly to Allaire's
Technical Support.
If more than one person should receive the e-mail, separate the e-mail addresses
with commas.
6. Enter in the Report e-mail field the e-mail address of the person at your
organization that should receive daily reports about your clusters.
Again, if more than one person should receive the e-mail, separate the e-mail
addresses with commas.
7. Enter the name of the mail server through which mail is delivered in the SMTP
Gateway field and click OK.
The ClusterCATS Report and Support e-mail options are enabled.
Configuring administrator authentication
Using the Web Explorer, you can configure two administration security modes, one of
which keeps unauthorized users from accessing a cluster and its content. When
authentication is enabled for a specific cluster, only authorized users will be able to
access and administer that cluster using their ClusterCATS Web Explorer.
If you are going to use the Local User Authentication mode, you must first create user
accounts on each server in the cluster for the individuals you want to be able to
administer the cluster members using the ClusterCATS Web Explorer.
To configure authentication modes for your clusters:
1. Open ClusterCATS Web Explorer if it's not already open.
Administering ColdFusion Server