MACROMEDIA BREEZE-FOR MEETING PRESENTERS Manual page 56

To change the width of a Breeze presentation outline:
•
Click the vertical gray bar on the left side of the Content pod, and drag it to the right or left.
To show/hide the presentation outline using the show/hide slide navigation toggle button:
•
In the navigation bar, click the show/hide slide navigation toggle button to hide or display the
presentation outline.
For a picture of the toggle button, see
Navigating a Breeze presentation
A Breeze presentation can be navigated only by meeting presenters. If there is more than one
presenter, each presenter can control the presentation. Any change made by any presenter is
immediately viewed by all meeting participants.
You can navigate a Breeze presentation using the navigation buttons or using the presentation
outline.
To navigate a Breeze presentation using the navigation buttons:
•
In the navigation bar, click the Forward and Back buttons to navigate between slides.
For a picture of the navigation buttons, see
If a presentation outline exists for a Breeze presentation, a presenter can use it to navigate between
slides.
To navigate a Breeze presentation using the presentation outline:
Make sure that the presentation outline is visible. See
1
"Navigating a Breeze presentation" on page
Click the name of the slide you want to navigate to.
2
The presentation moves to the selected slide.
Note: The Breeze presentation outline and navigation buttons are visible only to presenters.
Using the whiteboard overlay option
A Whiteboard pod can be placed on top of a Content pod for easy access to the whiteboard.
To use the whiteboard overlay:
Click the arrow in the upper left corner of the Content pod.
1
In the pop-up menu, select Whiteboard Overlay.
2
Note: If you are displaying a FlashPaper or SWF file, the whiteboard overlay will be disabled.
To show the pointer:
Click the arrow in the upper left corner of the Content pod.
1
In the pop-up menu, select Show Pointer.
2
Click in the Content pod to activate the pointer.
When using the whiteboard overlay over the Content pod, you can enable participant drawing
from the Content pod.
56 Chapter 8: Using the Content Pod
"The navigation bar" on page
"The navigation bar" on page
"The navigation bar" on page 55
56.
55.
55.
and